bbrown
WKR
First off I realize this is pretty close to the Ti Goat and Ed T designs but I am a cheap ass and like to tinker...
Since I was building this all from scratch and was still not sure if I would even use this I decided to use all SS because its about 40% cheaper than Titanium. I am planning on using this in my Oware 9'x9' pyramid tent but if it works out well I could order the 16" or 22" stove body in the future and use it in my 12'x12 canvas pyramid tent.
Step one: Order SS stock from Ti Goat - $89.25 total with shipping
*Stove body - 3' of 12" SS stock $17.25 *I used a circumference calculator and thought 2' would be enough - its not.
*Stove pipe - 7' of 10" SS stock $42.00
*DIY Damper - $10.00
*End Ring - $2.00 ea *Don't be like me and read Ti Goats directions - you need 2 of these.
*Stove pipe cable rings - $1.75 ea *need one of these every 12"-18" - I ordered 4 but ended up needing 5.
Step 2: Go to REI - $31.94 with tax
*MSR Alpine Plate for stove ends. $9.95ea and I planned on using 3 so I can cut the stove door out of the third.
Step 3: Wander into Walmart for something and...
*Realize they sell a 4 piece SS burner covers for your kitchen stove for only $12.97. You get both end plates and 2 extra larger ones plus they weigh less and the shape actually seems to hold the stove body better than the MSR plates. $13.84 total with tax.
Step 4: Return MSR plates back to REI
Step 5: Home Depot for misc supplies $35.25
*1/16 aircraft cable and cable clamps for body rings, stove rings and door handle.
*Pop rivets
*Threaded rod, washers and wing nuts for body supports.
*Hinges for door
*Dremel cut off wheels and sanding discs.
Since I was building this all from scratch and was still not sure if I would even use this I decided to use all SS because its about 40% cheaper than Titanium. I am planning on using this in my Oware 9'x9' pyramid tent but if it works out well I could order the 16" or 22" stove body in the future and use it in my 12'x12 canvas pyramid tent.
Step one: Order SS stock from Ti Goat - $89.25 total with shipping
*Stove body - 3' of 12" SS stock $17.25 *I used a circumference calculator and thought 2' would be enough - its not.
*Stove pipe - 7' of 10" SS stock $42.00
*DIY Damper - $10.00
*End Ring - $2.00 ea *Don't be like me and read Ti Goats directions - you need 2 of these.
*Stove pipe cable rings - $1.75 ea *need one of these every 12"-18" - I ordered 4 but ended up needing 5.
Step 2: Go to REI - $31.94 with tax
*MSR Alpine Plate for stove ends. $9.95ea and I planned on using 3 so I can cut the stove door out of the third.
Step 3: Wander into Walmart for something and...
*Realize they sell a 4 piece SS burner covers for your kitchen stove for only $12.97. You get both end plates and 2 extra larger ones plus they weigh less and the shape actually seems to hold the stove body better than the MSR plates. $13.84 total with tax.
Step 4: Return MSR plates back to REI
Step 5: Home Depot for misc supplies $35.25
*1/16 aircraft cable and cable clamps for body rings, stove rings and door handle.
*Pop rivets
*Threaded rod, washers and wing nuts for body supports.
*Hinges for door
*Dremel cut off wheels and sanding discs.
Attachments
Last edited: