Recent content by BULLBLASTER

  1. B

    Annealing causing pressure increase

    Shoulder bump would likely not be the same between annealed and non annealed brass. The annealed should bump more with the same die setting. Also i have noticed that the case necks distort slightly on annealing, so if you anneal after sizing the neck may be distorted.
  2. B

    260 AI Dies

    Standard redding full length dies are plenty fine. I like to upgrade mine with micrometer vld seaters and carbide expanders.
  3. B

    Sold Mdt polymer 6gt magazine

    Looking to sell a new mdt polymer 6 gt magazine. I bought this thinking that it might work for my 22 br, but when i got it today i realized that is not the case. It is a 308 magazine body with spring and follower made for the 6 gt case. $30 tyd?
  4. B

    The Shoot2hunt Podcast

    Yes they can, at least in a defiance action. Not sure on others.
  5. B

    Montana Unit 270 Draw Question

    I think you still need to draw a general combo before you can draw the unlimited 270
  6. B

    Model 70 to 7PRC?

    Check with your builder on the need to trueing before just assuming it needs done. IMO the gains are minimal if noticeable, especially for the expense. I too am impatiently waiting for a m70 VG from stockys. The B&C i have works fine but is not my preference ergonomically.
  7. B

    what happens when you DONT draw a Montana B license

    Ya you get the refund the same as with combo.
  8. B

    Air pressure reality

    Its pretty easy to get a usable solution without a device to read pressure. For every 1000 feet above sea level subtract 1 from 30 and that is typically close enough for reasonable ranges. Likewise it isnt difficult to get close enough in temp entered.
  9. B

    New Stock Timelines from Manners and AG Stock

    Keep an eye on manners site. They typically have a lot of ready to ship stocks that can save time.
  10. B

    I need help, what's wrong with my chamber?

    It almost looks like there is an imperfection in the chamber at that point to me and brass is flowing into it. Can the brass be sized and reloaded? How does it shoot? It looks much closer to the case head than the example huntnful posted, and looks like it would still be in tue thick case head...
  11. B

    I need help, what's wrong with my chamber?

    The ejector is always pushing on one side of the case head, even if the bolt is closed. The case is being pushed down toward the bottom of the chamber when it is closed. Then rotates so that pressure can eject it out of the action once opened. The cartridge doesnt just rest in the chamber.
  12. B

    Truck Topper for camping

    You can stop the dust coming in if you leave the front slider between the capper and the cab open.
  13. B

    Havester Evo is a no go - discontinued - Moved to a Banish 30

    Silencershop lists an omega direct thread for the same price as the evo was. Could have something to do with them discontinuing it. https://www.silencershop.com/silencerco-omega-300-dtm.html
  14. B

    Spotting scope, glass vs reticle

    I say glass quality. I dont like inches for spotter correction because what does an inch look like at 500-600 yards without a ruler. But a spotter can fairly easily indicate based on a known size. “Half a body high” for example. Or “half a deer left” and a shooter can quickly adjust. I would...
  15. B

    Stocky’s New Products SHOT 2024

    Any eta on when youll take orders? Can you save me a carbon fiber color vg? 😁
See more

Latest posts

Featured Video

Stats

Threads
323,329
Messages
3,394,799
Members
75,157
Latest member
acyellow

Latest Articles

Top