Hoyt Carbon Spyder 34

shaun · Dec 21, 2014

Originally had this up as Package now I am wanting to sell it as bare bow. I will include factory strings along with it as well.

Specs:
CS 34
#3 cam set at 29" I can change modules to different draw if needed
70-80lb limbs
First Strings XWire strings
Real Tree Xtra Pattern

975.00 CONUS

boom · Dec 27, 2014

Damn. This could derail my savings......

This is last years bow?

shaun · Dec 27, 2014

boom said:
Damn. This could derail my savings......

This is last years bow?

Yes this is the 14

FrankieP1988 · Dec 27, 2014

boom said:
Damn. This could derail my savings......

This is last years bow?

I was thinking the same thing, too bad it's not #2 cam

FrankieP1988 · Dec 27, 2014

So just to double check, is there a module with the #3 cam that will accomodate a 28.5" draw

HardcoreHunter · Dec 27, 2014

FrankieP1988 said:
So just to double check, is there a module with the #3 cam that will accomodate a 28.5" draw

Yes Frankie there is. I realize I am not the OP, but have numerous hoyts, and the cam system allows for DL adjustment via modules. Each Cam has the ability to be adjusted within a certain range. The #3 cam goes down to 28 inches I believe.They normally run about 15 bucks, but depending on your local dealer, they will often just trade you the current module for the one you need. Each Cam has the ability to be adjusted within a certain range.

velvetfvr · Dec 27, 2014

HardcoreHunter said:
Yes Frankie there is. I realize I am not the OP, but have numerous hoyts, and the cam system allows for DL adjustment via modules. Each Cam has the ability to be adjusted within a certain range. The #3 cam goes down to 28 inches I believe.They normally run about 15 bucks, but depending on your local dealer, they will often just trade you the current module for the one you need. Each Cam has the ability to be adjusted within a certain range.

#3 cam on the 34 models only goes to 29" dl in the a slot, which is the shortest draw.

#3 cam on the turbo and 30 models goes to 28" dl in the A slot.

This is a #3 cam 34 model. Draw range is 29-31.

So no, this bow can't go to 28.5" with any draw mods.

HardcoreHunter · Dec 27, 2014

velvetfvr said:
#3 cam on the 34 models only goes to 29" dl in the a slot, which is the shortest draw.

#3 cam on the turbo and 30 models goes to 28" dl in the A slot.

This is a #3 cam 34 model. Draw range is 29-31.

So no, this bow can't go to 28.5" with any draw mods.

I stand corrected, my apologies.

Vegeman · Dec 27, 2014

I've got the exact same bow...but with the #1 cams (because I'm a freakin' dwarf). This is a killer bow for a great price - they're normally running around $1500.00 over in the States and even more overseas.

shaun · Feb 17, 2015

BARichardson · Feb 17, 2015

I know speed isnt everything! Im shooting the 2015 CST 70# 30.5" draw, 418gr. XT hunter arrow shooting 322 fps avg. and I was wondering if this 34 with the 80# limbs is faster than the 2015 CST do you know the speeds ur getting? im looking to get a second bow (target/back up hunting) If its close im guessing ill get the same speeds but without the turbo cam HUMP to pull over..

shaun · Feb 18, 2015

The turbo from this year is shooting the same arrow at 70 lbs that this one did at 80 almost the exact same speed. 502g arrow at 281 on turbo and the 34 was at 285

BARichardson · Feb 18, 2015

sounds like you have both bows.. how do u compare them?

VarmintSniper30 · Feb 19, 2015

pm sent

Hoyt Carbon Spyder 34

shaun

WKR

boom

WKR

shaun

WKR

FrankieP1988

WKR

FrankieP1988

WKR

HardcoreHunter

WKR

velvetfvr

WKR

HardcoreHunter

WKR

Vegeman

FNG

shaun

WKR

BARichardson

FNG

shaun

WKR

BARichardson

FNG

VarmintSniper30

WKR

Similar threads

Latest posts

Featured Video

Stats

Latest Articles