DEW0341's latest activity

  • DEW0341
    DEW0341 reacted to Runolfson's post in the thread 7mm PRC and IMR4831 with Like Like.
    Last weekend I tested H1000 and fed210 primers. No problems. Decent groups: .75 moa 69.3 grains, 162 eldx, new petersen brass. 20"...
  • DEW0341
    DEW0341 replied to the thread 7mm PRC and IMR4831.
    I would like to try them eventually. I have a few hundred 180eld on hand. With the prices these days I’m trying to as rational as...
  • DEW0341
    DEW0341 replied to the thread 7mm PRC and IMR4831.
    UPDATE: Barrel sped up from 50 rounds to 144 total on it. Factory 175 ELDX - 2884fps to 2906fps avg IMR4831 and 180 eldm- 2719fps...
  • DEW0341
    DEW0341 replied to the thread 7mm PRC and IMR4831.
    Yes I have 800 gm215m of a diff lot to use up before I have to switch over to 210’s I have laying around. I think I had seen long range...
  • DEW0341
    DEW0341 replied to the thread 7 PRC Powder.
    61 grains (hodgdon website max) IMR4831 with 180eld out of 22” barrel getting 2768 Sent from my iPhone using Tapatalk
  • DEW0341
    DEW0341 reacted to TxLite's post in the thread 7mm PRC & N570 with Like Like.
    Tooth brush was a great recommendation. I loaded some up tonight from 69gr-73gr in half grain increments. This was the final load, pre...
  • DEW0341
    DEW0341 reacted to Marbles's post in the thread Painless load development (mine) with Like Like.
    Ok, started the thread. https://rokslide.com/forums/threads/does-brass-matter.347632/ I'm going to update it slowly, primarily because...
  • DEW0341
    DEW0341 reacted to BossGobbler2024's post in the thread Reloading 7PRC with Like Like.
    My thought is that for a hunting rifle if your first three shots are 1 MOA consistently then its a good load. If your purpose is other...
  • DEW0341
    DEW0341 reacted to tibo's post in the thread Reloading 7PRC with Like Like.
    24inch barrel 2980fps at 66.3gn. It is way past max book do not try this without working a ladder. I also wouldn't bother with Hornady brass
  • DEW0341
    DEW0341 replied to the thread Reloading 7PRC.
    What barrel length and velocity Sent from my iPhone using Tapatalk
  • DEW0341
    DEW0341 replied to the thread Vetrical grip options.
    MPA EVG grip. For me it’s the best I’ve tried out of 5 or 6 on a chassis. You’ll need to use a file or dremel for an exact fit but it’s...
  • DEW0341
    DEW0341 replied to the thread Which full length resizer die to get?.
    Order from Forester custom honed dies. For the price compared to bushing dies can’t be beat. Sent from my iPhone using Tapatalk
  • DEW0341
    DEW0341 replied to the thread Reloading room? Garage room or basement?.
    I do all of my brass prep in the garage. Keep brass in the house at all times otherwise. Prime, charge, seat bullets in the house. I...
  • DEW0341
    DEW0341 reacted to B_Reynolds_AK's post in the thread Painless load development (mine) with Like Like.
    Thanks for the great advice throughout this thread @Formidilosus. A couple months ago I still thought hand loading wasn’t for me...
  • DEW0341
    DEW0341 posted the thread 7mm PRC and IMR4831 in Reloading.
    Haven’t seen anyone post data with IMR4831 in a 7mm PRC. So this is for those interested. First 50 rounds down the barrel today. I have...
Show older items

Latest posts

Featured Video

Stats

Threads
322,682
Messages
3,387,748
Members
75,060
Latest member
bapicella

Latest Articles

Top