Recent content by Grizz2150

  1. G

    Help me pick a caliber for a magnum length Mark V

    Yes 270 Weatherby.
  2. G

    Custom 300 H&H Mag

    I can shoot 300 H and H out of my 300 Weatherby. Done deal.
  3. G

    Is it possible to turn a monte carlo stock into a straight comb?

    You will need to mount a scope lower over the bore. Scopes with smaller objective Lenses. Im thinking of having my Weatherby monte carlo stock (HUMP) taken down to reduce cheek slap. The best solution is MAG-NA-PORT the barrel.
  4. G

    Has anybody chopped the barrel of a 375HH?

    Ideal barrel length. Mag Na Port.
  5. G

    Has anybody chopped the barrel of a 375HH?

    The barrels of my heavy caliber rifles are 20 to 22 inches. Much handier in the African and Alaskan Bush. The muzzle blast is glorious. All barrels are Mag Na Ported.
  6. G

    Help me pick a Calibre!

    I would use 200 to 220 gr. Bullets in the 30-06 and 300 Mag
  7. G

    Help me build a sheep rifle!

    Forget that mumbo jumbo. Get a tikka T3 X light 300 Win Mag. Aluminum scope mounts. If you can't pack that up a mountain take up Golf.
  8. G

    Help me scope a 358 Norma Mag!

    Cutting the 358 NM barrel to 20 inches gets the rifle into action in the Alaskan bush, heavy cover in Africa, the Jungles of Camaroon and the Congo. Velocity loss is minimal. Install open sights, MagNaPort. My 20 inch barrel lost 80 FPS. Truely insignificate. It wears a Leupold 1.5 to 5 variable...
  9. G

    Old Weatherby Mark V 300wby

    They installed a proper weight barrel for the 300 Weatherby cartridge. Make sure the original German trigger is not fractured. A Weatherby collector for forty years i've seen four fractured triggers. Replace with timney.
  10. G

    Old Weatherby Mark V 300wby

    Serial No indicates action built in 1961. Safety is on the receiver. Triggers were made of an zinc alloy and had a tendency to fracture. Gunsmiths replaced them with Timneys. That is an original FOAM FILLED Bell and Carlson stock.
Top