Recent content by jlink83

  1. J

    Mcgowen Barrel Reviews

    Man, after reading this thread I feel lucky. I sent off my 700ml to them last year to have a smokeless barrel spun on it. When I got the original invoice it stated my trigger was broken. So not off to a good start, well then to my surprise I get a shipping notice that my rifle is on the way back...
  2. J

    Sold 25-06 loading supplies + .284 e-tips

    is brass still avalible?
  3. J

    WTS 700ml parts

    weekend bump
  4. J

    WTS 700ml parts

    I am clearing out my 700ml parts. 1 black synthetic stock with ramrod 1 blued 50 cal barrel it does have pitting but sabotted round fit down the barrel snug 2 weather shrouds 2 firing pins with springs 3 breech plugs with no 11 nipple, i have removed and greased all the nipples 1 complete bolt...
  5. J

    Remington 700 ML

    I am shooting BH209 in my 700MLS with Lukes breech plug, I am currently shooting the Fury Universal fit 320s with 83 grains by weight of BH209. Before the season checking zero I put 2 in the same hole at 105 yards.
  6. J

    Careful what you wish for! TC Encore questions

    I got my first MGM barrel this spring in 6.5 PRC, I was starting to get frustrated with my groups. The gun showed real potential then would be kinda inconsistent as you describe above. This was all during their prescribed break in process. Once I started shooting the gun and not cleaning so...
  7. J

    Remington 700 ML

    I have had really good results with Fury 50 universals in 320gr, with 83gr of blackhorn by weight out of my 700ml
  8. J

    Careful what you wish for! TC Encore questions

    bergara had a run on 16in 300 blackout barrels that were threaded from the factory. It liked 170gr flatnose 30/30 bullets. Also had my 45/70 katahdin barrel threaded, thats alot of fun with 405grs
  9. J

    WTB 700 ml bolt or parts gun

    I am looking for a 700ml bolt with the handle, I would also be interest in any complete guns that could be used for parts. TIA
  10. J

    Careful what you wish for! TC Encore questions

    I buddy that I worked with had a Pro Hunter that he had to shim the stock bolt like that, one thing to check would be the locking lug springs. I had to place a BB behind one of my barrel for it to fully engage the locking lug, and even after that I have to really snap the gun closed, if I am to...
  11. J

    Careful what you wish for! TC Encore questions

    Give Mike Bellm a call, he was extremally helpful when i called him about issues I was having with the spring kit I had installed for 10 years. He should be able to get you on the right track even if it is sending it back to him. I have a standard stainless encore for 18 years, the first 10 it...
  12. J

    .50 cal muzzleloader bullet to bore vs sabot

    I tried the Parker BE 275s in a new to me Encore last year and switched from 458gr nosler 300BTs to Fury universal 320gr 50s in a 700ml. I was extremely impressed with the Fury my one kill with it was a 165 yards bullet stopped just under the fair side shoulder if I can upload a picture I...
  13. J

    How long to leave BH209 in muzzleloader before firing?

    If the gun isn't fouled I've left it loaded from end of season until the next fall and use that load to check zero.
Top