Search results

  1. J

    Sold Zastava AK Furniture

    SPF Up for sale are the buttstock and upper and lower handguards for a Zastava (Yugo) N-PAP AK rifle. Will fit all N and Z-PAP rifles I am told. The other parts include are the through bolt, metal buttplate with two screws, upper handguard retaining spring, lower handguard metal insert and a...
  2. J

    Sold Glock Gen 3 Parts

    SPF Going through more of my stuff and I found factory parts from a Glock 17L, Gen 3. The parts will fit any Gen 3 model. Includes the adjustable rear sight, firing pin safety and spring, connector, trigger with trigger bar and a spring that I cannot recall where it came from. Over $50 in...
  3. J

    Sold Custom Ruger SBH Bisley 44 Mag

    SPF Up for sale is a custom built 2009 Ruger Super Blackhawk Bisley 44 magnum revolver. Comes with a factory plastic hardcase and owner’s manual. I picked this up used off the internet and mechanically it was perfect. When I bought it the 7.5-inch barrel had been reduced to 4.6 with an...
  4. J

    Sold Custom PTR 91

    SPF Custom PTR Model G.I. 7.62x51 (308) battle rifle. This rifle was specially designed to accept all 308 and 7.62x51 ammunition. Purchased this rifle over 6 years ago and shot one magazine through it and then put it away. Rifle is like brand new, only better, because three years ago I added...
  5. J

    Sold Custom Zastava M70 Mauser 308

    SPF I have a custom built Zastava M70 Mauser 98 in 308 for sale. I purchased the new barreled action in the early 1990s, and later found an original Zastava fiberglass stock for it. Obtained a new lightweight Tubb’s Superior Shooting Speedlock Firing Pin and Spring set and new set of B-Square...
  6. J

    Sold Ruger 6-Shot 357 Redhawk

    Up for sale is a 1984 customized stainless-steel Ruger Redhawk 6-shot 357 Magnum with a 5.5-inch barrel. The action has been slicked up and the metal matte hard chromed by Mahovsky's Metalife in Pennsylvania. It now looks like a bead blast stainless but slightly darker. There are a few small...
  7. J

    Sold Warne 30mm QD Rings

    SPF Up for sale is a brand-new set of 14RLM Warne 30mm Ruger, QD, Med Matte Rings that fit the Ruger #1, Mini-14 and Blackhawk. I took them out of the container to use but found them too low for my scope so used the same model in the High version. I accidently threw out the correct container...
  8. J

    WTS Ruger Flat Top Blackhawk Bisley Parts

    Going through more of my stuff and I found another set of factory parts from a Ruger NM Flat Top Bisley Blackhawk 44 Special. This includes the Bisley laminated grips with screw, flat top rear sight (complete but without pin), ejector rod, trigger return spring, complete base pin and complete...
  9. J

    Sold Misc Rifle Parts

    SPF As I go through more boxes, I found these parts left over from several custom rifle builds. I am selling them as a group. They include the parts description with current online prices. Over $300 in parts, before shipping. I will sell all for $150 shipped. Wisner’s Win pre-64 M70 African...
  10. J

    Sold S&W Model 10 Parts

    I went through boxes on my workbench and found the leftover factory parts from a S&W model 10-9 receiver, that was custom built into a model 13. This includes every part except the barreled receiver. All in excellent shape and includes a Hogue Monogrip with screw and stirrup and factory wood...
  11. J

    Sold Ruger Super Blackhawk Bisley Parts

    SPF I went through boxes on my workbench and found the leftover factory parts from a Ruger Super Blackhawk Bisley. They include the grips with screw, sorry for the dog hair on the grip, reduced power trigger return spring, rear sight (without pin and two springs), ejector rod, base pin...
  12. J

    Sold Ruger No.1 Parts

    SPF I went through boxes on my workbench and found the leftover factory parts from several Ruger No.1 custom rebuilds. These parts are all in good shape and include hammer with hammer spring, two safeties with pins, two 3 screw triggers, complete, one 2 screw trigger, complete. Some of these...
  13. J

    Sold Browning Hi-Power Parts

    SPF I went through boxes on my workbench and found the leftover factory parts from a Browning Hi-Power, or P35, custom rebuild. These parts are all in good shape and include all the springs, one 13 round magazine marked with a “RA”, two sets of grips, wood and plastic, rear sight, two grip...
  14. J

    Sold S&W 64-5

    Up for sale is an excellent condition S&W 64-5 revolver in 38 Special. I went through the entire firearm and cleaned and inspected it. There are no issues with it and it is tight and smooth. The outside the firearm is also in excellent condition and comes with new Pachmayr Gripper grips...
  15. J

    Sold Proof Research Barrel 6.5

    SPF I have a Proof Research Carbon wrapped blank barrel. It is unused, not even out of the wrapper, and was made over a year ago. It is in 6.5 (.264) center fire, 24-inch final length for a bolt action rifle. It has a 1x7.5 twist with 4 grooves Sendero Light profile at just over 2 pounds...
  16. J

    Sold Lots of Parts

    I went through boxes on my workbench and found the items shown in the two pics. I know that some of the parts fit a Winchester 94 and 86. Other parts fit the Ruger No.1, while other parts fit the Ruger Bisley and Blackhawk. Still other parts fit other rifles and handguns. All parts are in...
  17. J

    Sold Ruger No 1 Parts

    Re-advertising the following original Ruger No. 1 factory parts, in very good to excellent shape, for sale: (I will take $150 for all, shipped or…) Two - tang safeties with two roll pins each ($20 each, shipped) One - two screw trigger with spring and one trigger/sear pin (new style trigger)...
  18. J

    Sold Custom Ruger No 1 300 WM

    SOLD Up for sale is a custom built 1988 Ruger No. 1B rifle in 300WM. I picked this up in Alaska over 10 years ago and used it hunting for one season. It was very accurate using Federal factory loads, but I never reloaded for it. It shot well enough that in 2018, I sent it to New England Custom...
  19. J

    WTS Ruger No. 1 Parts

    After rebuilding a few Ruger No. 1 rifles, I have the following original Ruger factory internal parts available for sale: Two - tang safeties with two roll pins each One - two screw trigger with spring and one trigger/sear pin (new style trigger) Two - three screw triggers with two springs and...
  20. J

    Sold Turnbull Winchester 94

    SPF Winchester 94 SRC in 30 WCF (30-30) originally built in 1927 that has been completely rebuilt by Turnbull Restorations in 2019. They went through the entire rifle and re-built it to the 1927 specifications. All markings were restored, some small parts replaced, all metal parts charcoal and...
Top