Search results

  1. C

    Sold Crispi Wild Rock Boots

    Bump...OBO
  2. C

    Sold Manners EH-1 Stock

    They are up.
  3. C

    Sold Manners EH-1 Stock

    Manners EH-1 Stock inlet for a long action 700/clone, Proof Sendero barrel channel, custom paint job by Ding-Go Coating in Boise. Swivel studs front and rear, also front and rear QD flush cups on the left side. Pic bipod rail up front. Has been previously bedded. Bottom metal not included...
  4. C

    Sold Kelbly Atlas Tactical

    Kelbly Atlas Tactical long action w/ mag bolt face. Action has about 400 rounds through it, great condition. Trigger not included. $825 Shipped to your FFL. Paypal Friends and Family please. Sold pending funds.
  5. C

    WTS 26” Brux 7.5 twist M24 6BRA

    Used 26” Brux 7.5 twist M24 contour chambered in 6BRA by Nathan Wright for a Curtis Custom Axiom action. Comes with an MBM Beast 3 port 2 piece brake, (188) pieces of 3x and 2x fired Lapua brass. Total round count is +/- 575, throat has moved right at 2.5k. Shoots 110 SMK’s @ 2850 extremely...
  6. C

    Sold MPA BA Comp Chassis

    MPA BA Comp Chassis w/ rat system in burnt bronze. Perfect condition. Short action 700/clone inlet. $650 Shipped. Paypal Friends and Family please. Sold pending funds.
  7. C

    Coal/cbto

    An ogive is an arc. So I guess if we need to we can start saying the apex of the ogive.
  8. C

    Coal/cbto

    Apologies Just trying to help.
  9. C

    Coal/cbto

    Your seating stem actually contacts the bullet forward of the ogive, or at least all of them I’ve measured. Some seating stems just don’t work well with certain types of bullets because of their shape. It’s not that they touch or bottom out at the bullet tip. The seating stem can actually bite...
  10. C

    Coal/cbto

    Not sure what you mean by won’t effect BTO. The BTO measurement is taken below where the seating stem contacts, so by bottoming it out it should effect BTO. Or am I misunderstanding what you are saying. It really isn’t a bad idea to bottom out a couple times anyway. If I am getting bad runout, I...
  11. C

    Coal/cbto

    That’s the perfect way to set tension. You can’t do any better. Can you feel any difference in resistance as you are seating? Annealing necks or no? Can you feel your seating stem “catching” on the bullet after seating on the upstroke?
  12. C

    Sold Proof Sendero 6.5 Blank

    6.5 Proof Sendero 7.5 twist blank for sale. Finish @ 26”. $650 shipped
  13. C

    Sold Crispi Wild Rock Boots

    Crispi Wild Rock GTX Boots 400 grams insulation size 8.5 Used one time for about 30 minutes. Crispi boots just do not fit one of my feet well, which sucks! $350 shipped OBO
  14. C

    Strategy for dealing with temperature

    Oh, and don’t bother doing much with this until you have at least 100 rounds down e barrel and have your brass fire formed. It will likely all change after the barrel is broke in and you are running fired brass.
  15. C

    Strategy for dealing with temperature

    First of all make sure you are using a temp stable powder, like H Extremes. When you are developing your load, don’t just find a single powder charge that shoots. Look for an entire node that shoots well and consistent over a fairly wide powder charge range. Depends on case capacity, but a .223...
  16. C

    Coal/cbto

    True. Back to the OP’s original issue, if you haven’t touched your die between rounds and you are seeing inconsistencies in BTO, it’s usually inconsistent neck tension. Have seen compressed loads show variances in BTO as well.
  17. C

    Coal/cbto

    Roger. But what takes the most damage on a bullet that would show up as inconsitencies? Bullet tips or ogive? Ogives do not get damaged, they are what they are. Bullet tips get marred, bent, meplats aren’t the same. You have to admit that the tip is the week point of the entire loaded shell...
Top