Search results

  1. zbb

    Is this a problem?

    Honestly that looks like the carbon is starting to lift and separate. I would get ahold of Uukha before I drew that bow back again. Curious, just based on where you quiver is, is that blemish or crack starting at the end of a wedge?
  2. zbb

    SD Archery Draw

    Hey can you share where you found that? It is difficult to find this kind of info on the website. Thanks, the rest of this isn’t directed at you specifically. (Edit)- I found that info in the same PDF I linked. You’re right it’s a combination. 2142 res, 877 non-res for antelope. Here is a link...
  3. zbb

    Building a new bow…

    I have a couple questions if you don’t mind. Do you have a flat ground on your wedges or are they straight tapers? Did you put any tip wedge in? Also are you using some heat tape instead of an oven? I really like how the maple looks! Gonna look good!
  4. zbb

    Is Pueblo a ghetto??

    I lived in Pueblo West for 3 years. In that time, one of my neighbors shot two cops then barricaded himself in his house. Cops turned out fine btw just a couple superficial graze wounds. Another time about a year later a guy got in to it with a cop at my daughters middle school ended up getting...
  5. zbb

    Well…. I’m a Wyoming Landowner now.

    If you get in a pinch and are in the area a case of beer is cheaper at trailshead in sd than at buckhorn right on the border. But they both close fairly early. Buckhorn is a cool place to hang out though. If you venture to trailshead at night or come from deadwood watch out for elk crossing the...
  6. zbb

    South Dakota

    Do you have a link to this? The only thing I could find is for possible changes to antlerless whitetail tags for archery and muzzleloader seasons. Also 8% of what, tags are unlimited for residents. My dad drew a hills WT tag, 2 points for a resident! Crazy Edit to add, congrats to those that...
  7. zbb

    South Dakota Website

    If you were trying to sign in from the old system you’re gonna have to set up a new account. I kept trying to sign in the old way a couple times after reading this thread and I got the same “site under maintenance”. Got my new login set up and couldn’t find the preference points either. I’m sure...
  8. zbb

    South Dakota Rifle draw results

    Another thanks! I didn’t know you could see that stuff in the app. I’ll admit I haven’t spent much time on it after I moved though. WR whitetail tags for the wife and I! Can’t wait!
  9. zbb

    South Dakota Rifle draw results

    I’m doing the same thing, and getting pissed every single time. Did you draw a cow tag in the hills?
  10. zbb

    South Dakota Rifle draw results

    On a Saturday? Good luck dudes!
  11. zbb

    South Dakota Rifle draw results

    I can’t remember when the results will be posted, I briefly and I do mean briefly looked at the application and didn’t see when they’ll be posted. Should be around the beginning of July. To check you can log in and under your profile it will be in “view my application/licenses. Hope this helps
  12. zbb

    New Bowstring break in

    I would think so. I takes my bows 40-50 shots before I quit playing with the brace height. After I get my initial bh measurement I don’t measure it again until I have quite a few arrows through it. I adjust the string a turn or half turn a time. That’s what works for me.
  13. zbb

    New Bowstring break in

    Did you check your brace height, and what is the string material? I make my strings out of b55, after I stretch them it still takes quite a few shots to get the string where it needs to be. I’ve never used fast flight so I don’t know if it stretches at all or just significantly less.
  14. zbb

    Properly Increasing Draw Weight on Recurve

    Here’s something that has worked for me that I found out building a bow. I made a riser and stained it and didn’t like how it looked so I built a new riser and cut the limb angle a little different on the second one and ended up making the bow about 4 pounds heavier. I made wedges for my Palmer...
  15. zbb

    DIY Longbow

    Haha I’ve been looking to build a pattern sander too. Also been toying with getting a drum sander as well. It’s really fun and addicting. I changed the design on mine and am building my wife a bow with that design. I’m hoping to get a little more speed. We’ll see though. Thanks, I really like...
  16. zbb

    DIY Longbow

    That looks awesome dude. I’ve built three sets of limbs using binghams and I swear the hardest part is cutting the string grooves. I know it’s a little late for the op now but something I thought worked really nice was to cut a piece of 1/4 inch hardboard for the form and used my router with a...
  17. zbb

    Wyoming Unit 38 type 9

    Here’s a bull I killed in your hopeful unit last year. Not the biggest but I shot him at 5 yards, so that was pretty cool. Definitely saw bigger bulls. As others said there is a ton of people up there but between two different scouting trips and two trips up there in September my dad and I never...
    • zbb
    • Post #16
    • Forum: Elk
  18. zbb

    South Dakota Elk Draw

    I know it, kind of a bummer.
    • zbb
    • Post #34
    • Forum: Elk
  19. zbb

    South Dakota Elk Draw

    When I was in 8th grade me and two other guys from my class drew H2 tags. One was a cow tag and myself and another guy had any elk tags. My first big game animal was a 330 bull from South Dakota haha. It was AWESOME! There was a lot of pissed off people though.
    • zbb
    • Post #32
    • Forum: Elk
  20. zbb

    Found a Monster Skull

    I think I made a boo boo posting a link. I did, my bad. But you can measure the top m2 molar > 1 1/8“= grizzly, black bear have less than 1 1/8“. I got it from the Yellowstone grizzly project, I don’t know what their view is on hunting, but that’s where I got the info. I got the tooth measuring...
    • zbb
    • Post #27
    • Forum: Bear

Latest posts

Featured Video

Stats

Threads
322,911
Messages
3,390,578
Members
75,103
Latest member
JCNorthID

Latest Articles

Top