Sold 14.5” URGI-ish upper (DD, Geissele, SOLGW, P&W Saker)

Status
Not open for further replies.

Basher

FNG
Rating - 0%
0   0   0
Joined
Feb 22, 2023
Messages
32
Location
Lafayette, IN
I’ve had this upper for awhile and while it’s an excellent upper, I rarely use it and need some funds. Here’s the breakdown:

-Unmarked DD upper, Anchor Harvey forging, A4 w/ ramps
-DD 14.5” LW 5.56mm, mid-length, chrome-lined 1:7 barrel w/ ramps
-Geissele MK14 13.5” black rail
-Geissele Super gas block
-SilencerCo Saker ASR flash hider (P&W)
-SOLGW BCG
-Add the Raptor-LT CH for another $50 (normally $75 retail)

I don’t know an exact round count, but if it was more than 500 I would be completely shocked. I played musical optics for a short while and sighted each in, and shot two local 2-gun comps with it, and that’s it. It shot very well w/ Federal XM193 out to 300y (had no issues hitting 2/3 IPSC at that distance), and has run flawlessly using an A5 extension w/ H2 buffer w/ perfect ejection.

I’m asking $600 shipped W/O the BCG or CH, $725 shipped with BCG but no CH, or $775 for the complete upper as shown. I haven’t sold an upper in a few years, but checking current prices it looks like this would run about $1100 before tax/shipping to buy new.

I’m a relative newcomer here but can offer references on other forums spanning over two decades/250+ transactions with perfect feedback. Any questions, let me know. I’ll be cross posting this, so the first public “I’ll take it” followed by a PM gets the goods. Thanks!

Trades (cash is king, but a partial trade may help facilitate the sale):
-Hornady 6.5mm 123gr ELD-M or SST
-Hornady 6.5mm 95gr V-max
-Sierra 6.5mm 107gr SMK or 105gr Blitzking
-Speer 6.5mm 90gr TNT
-Hornady .224” 53gr V-Max (preferred) or 55gr V-Max
-Sierra .224” 65gr Gameking (# 1395)
-Sierra .224” 55gr Blitzking (# 1455) or 55gr Gameking (# 1365)
-Hornady .172 25gr HP
-Hornady .172 20gr or 25gr V-Max
-Nosler .172 20gr or 25gr Varmageddon
-CZ 527 mags in .223 or 6.5G/7.62x39
-Dillon Super Swage 600
-Hornady/Forster/Wilson case trimmer
-.218 Bee brass (new or 1x fired)
-.17 Fireball brass and/or factory ammo
-Vortex Strike Eagle 5-25x EBR-7C mrad
-Athlon Helos BTR2 2-12x AHMR2, 4-20x or 6-24x w/ APRS6 mrad reticle
-Arken EP5 5-25x mrad
-Timney 2-stage R700 trigger w/ bolt release
-Holosun 508T
-Trijicon RMR06
-Magnetospeed V3
-AMG Labs Commander shot timer
-KRG Bravo R700
-Grayboe Terrain or Renegade R700
-Mossberg 46M(b)
-Mossberg 146b
-Wet/stainless pin rotary tumbler setup
-Used Annealeez or similar

If you’re localish:
-Remington 7.5 SRP
-CCI 41, 450, 250 primers
-IMR 8208XBR
-Hodgdon Benchmark, Varget, H335, CFE223, maybe BL-(C)2
-Ramshot TAC, X-Terminator

bOdtt6v.jpg


aurkPlk.jpg


aeZSati.jpg
 
Last edited:
OP
B

Basher

FNG
Rating - 0%
0   0   0
Joined
Feb 22, 2023
Messages
32
Location
Lafayette, IN
Quality upper, I’ll ask around for you!

Also, try tacswap!!

Thanks, dropped the price to $750 shipped!

TacSwap requires a $10 fee to join. I may cave, but I’m already taking a nasty wash on this and not sure spending more is worth it lol. You couldn’t buy the barrel, handguard, and upper receiver for what I’m asking. :)
 
OP
B

Basher

FNG
Rating - 0%
0   0   0
Joined
Feb 22, 2023
Messages
32
Location
Lafayette, IN
Added an option to add the Raptor charging handle, price is firm and is ~35% less than it would take to buy new. If it doesn’t move at this price, I’ll find some other way to make things work on my end.
 
Status
Not open for further replies.
Top