Hardly used, looking to clear out a few things not getting used.
Complete with bolt carrier Under 100 rounds.
Upper cycled subsonic ammo extremely well.
Below is from the website for this upper.
Advanced Armament Co (AAC) AR-15 A3 Upper Receiver Assembly 300 AAC Blackout 16" Barrel
This Advanced Armament Corp. AR-15 Upper Receiver Assembly in 300 AAC Blackout is a pin-on, ready-to-shoot top end for use with any standard AR-15 lower receiver. The Mil-Spec 4150 chrome moly vanadium steel barrel comes equipped with 1 in 7" twist rifling, M4 feed ramps, a low profile steel gas block, and is finished inside and out with a protective black nitride treatment for superior durability and corrosion resistance. The muzzle is threaded with a 5/8"-24 pitch for easy installation of a silencer, and is topped off with an effective AAC 51T Blackout flash hider.
The upper features a forged M4-Style flat-top receiver onto which a Knight's Armament free floating URX 3.1 Quad Rail System is rigidly attached. The heat-treated, full auto bolt carrier is finished in a slick Nickel Boron coating, and comes equipped with a properly-staked gas key and Carpenter 158 steel bolt assembly.
This 16" 300 Blackout upper utilizes the versatile carbine length gas system, a good choice for this cartridge if various weights and types of ammunition are to be used. Most subsonic and supersonic loads, fired from either a suppressed or unsuppressed gun, are compatible with this configuration. However, some subsonic ammunition may not always cycle reliably under adverse conditions or in a severely fouled firearm without a sound suppressor attached to provide extra backpressure.
Technical Information
Complete with bolt carrier Under 100 rounds.
Upper cycled subsonic ammo extremely well.
Below is from the website for this upper.
Advanced Armament Co (AAC) AR-15 A3 Upper Receiver Assembly 300 AAC Blackout 16" Barrel
This Advanced Armament Corp. AR-15 Upper Receiver Assembly in 300 AAC Blackout is a pin-on, ready-to-shoot top end for use with any standard AR-15 lower receiver. The Mil-Spec 4150 chrome moly vanadium steel barrel comes equipped with 1 in 7" twist rifling, M4 feed ramps, a low profile steel gas block, and is finished inside and out with a protective black nitride treatment for superior durability and corrosion resistance. The muzzle is threaded with a 5/8"-24 pitch for easy installation of a silencer, and is topped off with an effective AAC 51T Blackout flash hider.
The upper features a forged M4-Style flat-top receiver onto which a Knight's Armament free floating URX 3.1 Quad Rail System is rigidly attached. The heat-treated, full auto bolt carrier is finished in a slick Nickel Boron coating, and comes equipped with a properly-staked gas key and Carpenter 158 steel bolt assembly.
This 16" 300 Blackout upper utilizes the versatile carbine length gas system, a good choice for this cartridge if various weights and types of ammunition are to be used. Most subsonic and supersonic loads, fired from either a suppressed or unsuppressed gun, are compatible with this configuration. However, some subsonic ammunition may not always cycle reliably under adverse conditions or in a severely fouled firearm without a sound suppressor attached to provide extra backpressure.
Technical Information
- Upper Receiver: A3 Flat-Top
- Barrel Length: 16"
- Barrel Contour: Medium
- Barrel Material: 4150 Chrome Moly Vanadium Steel
- Muzzle Thread Pattern: 5/8"-24
- Chrome Lined: No
- Barrel Finish: Black Nitride / Melonite
- Twist Rate: 1 in 7"
- Chamber: 300 AAC Blackout
- M4 Feed Ramps: Yes
- Muzzle Device: AAC 51-T Blackout Flash Hider
- Gas System Length: Carbine
- Gas Block Diameter: 0.750"
- Handguard: Knight's Armament URX 3.1 Quad Rail, Free Float
- Sights: None
- Bolt Carrier Assembly Included: Yes
- Bolt Carrier Type: Mil-Spec, Nickel Boron Finish
