6.5 Creedmor bullets needed

N8iV Warrior

Lil-Rokslider
Joined
Apr 7, 2017
Messages
125
Location
On a Reservation NOT by CHOICE
Hello everyone I am looking for accubond Long Range bullets to reload for a test load in the 142 gr and the 129 gr bullet. Let me know if you have any extra boxes or either one opened or full boxes for testing loads.
Thanks for the help and I will be using H-4350 powder or if you have a better load data let me know.
My rifle is: Nucleus action, Proof Research barrel 26” 1:8 twist, Apa Fat Bastard Break, Greyboe Ridgeback stock, Atlas Bipod, Aics mags, P-mags .
I’m currently shooting the Hornady factory Ammo in the match 140 gr , 143 gr ELD-X both shoot very well. I want to shoot a bonded bullet for deer, antelope, elk.
 

Attachments

  • 298DEC7D-2141-43C7-B829-19FE34CE8586.jpeg
    298DEC7D-2141-43C7-B829-19FE34CE8586.jpeg
    379.4 KB · Views: 52
  • BD152DFF-DF24-4D63-9CDF-DDA83B8D3C97.jpeg
    BD152DFF-DF24-4D63-9CDF-DDA83B8D3C97.jpeg
    191 KB · Views: 52

5MilesBack

"DADDY"
Joined
Feb 27, 2012
Messages
15,592
Location
Colorado Springs
Let me know if you want any 139gr Lapua Scenars for hunting or target. I sold my 6.5 and still have some leftover components etc.
 

Desert Dan

Lil-Rokslider
Joined
Jan 31, 2018
Messages
275
Location
Lansing, Michigan
I have a box of 100 Hornady SST 129 grain bullets that I got for free and have no use for. I was thinking about posting on here to move them so if you want you can have them for the cost of shipping.
 

Evergreen

WKR
Joined
Mar 21, 2013
Messages
340
Any experience with the ABLR on animals? I’ve read they aren’t so good under a few hundred yards
Killed a mule deer doe at 250 and a blacktail buck at 140 last season and they performed fine. Also killed 2 whitetail bucks at 350 and 525 both were pass throughs. I've been happy with their performance!
 

mvrk28

WKR
Joined
Mar 13, 2018
Messages
309
Location
CA
I just started doing a load test here are some grouping so far

I would recommend upping your charge weights with H4350. I've found great accuracy at 41.5 with the ABLR in 129 grains. Are you using Hornady Brass? If so I'd be willing to bet you could get up to 43 grains without serious pressure sign, potentially higher. I've been testing Hammer Hunter 124 gr with 43 grains of H4350 in Peterson brass (which usually has less case capacity than Hornady) without pressure sign in a 24" barrel.

Just a thought, feel free to PM with any questions.
 
Top