Nov 22, 2020 #1 M mdfanatic1980 Lil-Rokslider Joined May 8, 2016 Messages 128 Location Abilene, TX Which primer should I start working loads with? I’d like to buy some factory Hornady, but that’s obviously not an option. Federal 210? Federal 210m? Federal 215?
Which primer should I start working loads with? I’d like to buy some factory Hornady, but that’s obviously not an option. Federal 210? Federal 210m? Federal 215?
Nov 22, 2020 #2 E Elkdreamer WKR Joined Feb 11, 2020 Messages 780 Location Oregon Hornady load data shows they used the Federal 210. Hope that helps.
Nov 22, 2020 #3 6mm Remington WKR Joined Oct 19, 2012 Messages 1,768 Location Western Montana I've had great success in other calibers of similar size, etc with Federal 210 and 210M
Nov 22, 2020 #4 F Flatgo Lil-Rokslider Joined Aug 10, 2015 Messages 223 I use the 210m I’ve heard rule of thumb over 60 grains of powder go with a magnum primer.
Nov 23, 2020 #5 Hiwayman92 WKR Joined Apr 24, 2016 Messages 360 210 M’s work best for me, I’ve tried CCI 250’s, 215M’s, but 210 M’s were the clear winner. Sent from my iPhone using Tapatalk
210 M’s work best for me, I’ve tried CCI 250’s, 215M’s, but 210 M’s were the clear winner. Sent from my iPhone using Tapatalk
Nov 25, 2020 #6 Azone WKR Joined Apr 21, 2018 Messages 1,538 Location Northern Nevada 210m has worked very well under VV565 for me.
Nov 25, 2020 #7 JakeSCH WKR Joined Jun 14, 2020 Messages 974 Location San Diego, CA I think either size will work since the powder charge is on the border. That said I am running 210Ms and it is working very well with RL26.
I think either size will work since the powder charge is on the border. That said I am running 210Ms and it is working very well with RL26.
Nov 26, 2020 #8 U unclericco WKR Joined Aug 31, 2017 Messages 711 Location NV I had a good supply of the regular Winchester Large rifle primers so I started working up loads with them first. Getting great results with them
I had a good supply of the regular Winchester Large rifle primers so I started working up loads with them first. Getting great results with them