7mm mag loads

Turner

Lil-Rokslider
Joined
Jun 20, 2017
Messages
241
Location
SD
I was hoping someone could give me a little direction. My new rifle has a 1:8 26" Benchmark barrel. My intentions were to shoot 162gr Hornady Precision Hunters, but I'm getting less than ideal results (little >1 MOA). The Precision Hunters were giving me an average of 2928fps. I'm am going to have a friend work up some loads for me and would like some input. For powder I'm looking at retumbo or H1000. Bullets are my main concern narrowed down to: Berger 168 or 180 or ELD-X 175gr. I'm leaning towards the ELD-X. MOA gave me their basic load workups and they use only Bergers (suggested 168 or 195's). My main concern is effect on game not target shooting, but obviously would like to get to the 0.5 moa guaranteed by the rifle. Thanks for any help.
 

Fonkie

Lil-Rokslider
Joined
Dec 13, 2014
Messages
268
I shoot 68.5 gr H1000 & 168 Berger hunter hybrids in my factory Tikka superlight. It will shoot 1/2 moa & runs about 2875 fps in the factory chamber
 
Joined
Jun 13, 2016
Messages
1,558
Location
California
Don't discount the 162s if you are going to hand load. I shot the 162 precision hunter ammo in my 7mm and got similar results as you. But, I hand load them .010 off the lands with H1000 and easily get .5 MOA.
 
Joined
Mar 31, 2019
Messages
3,301
Location
Weiser, ID
I use H1000 and 180 Hybrids in mine. It makes 2925 fps with a 24" barrel and its hell on deer and elk . In my experience the Hybrids are an excellent game bullet.
 

RoJo

WKR
Joined
Dec 5, 2016
Messages
403
Location
South Central Arizona
I am hoping to verify sub-1/2 MOA accuracy if I can get a calm day, shooting Berger 168's ahead of 60.5 gr of RL 22 at 2850 fps. Bullets are right at the lands.
 
OP
T

Turner

Lil-Rokslider
Joined
Jun 20, 2017
Messages
241
Location
SD
thanks for the replies, in theory wouldn't a heavier bullet be better suited for my 1:8 twist? I know it would be best to try all of them, but I'm trying to avoid $35-50 a box of bullets and burning up my barrel. Good to hear that those 162 precision hunters weren't just me. the 178's shoot sub moa out of my Sako, guess I was hoping to get lucky and not reload. Might try one box of the HSM trophies with 168 bergers.
 

Totoro

WKR
Joined
Jun 10, 2017
Messages
450
Location
NorCal, PRK
Correctly me if I am wrong, but does MOA provide a load recipe? Or just a group shot guarantee based on selected ammo of their choice?

8 twist is begging for 195 EOL or 180 ELDM, IMO.
 
OP
T

Turner

Lil-Rokslider
Joined
Jun 20, 2017
Messages
241
Location
SD
After I contacted them they did provide me with the two recipes for 168 and 195 bergers. I have personally had good experiences with the eld-x and have a couple of friends that had Berger problems. The bergers shot great, but on animals if they didn't drop then tracking blood was an issue due to the lack of. Just hesitant for this reason.
 

Rob5589

WKR
Joined
Sep 6, 2014
Messages
6,243
Location
N CA
In my 7RM's I have had only so-so accuracy with Retumbo, have not tried H1000. My best results have come with R22 with bullets from 162-180 grains in both speed and accuracy.
 

jruff002

Lil-Rokslider
Joined
Apr 2, 2019
Messages
146
my 7's where i could load them long all shot the 168 VLD's .010-.020 off lands with Retumbo (thinking off top of head 71 grains but always work up it may have been 72 it's a hot load but no pressure signs) and both guns avg 3000-3020 fps and .5 or less moa. For 160 plus pills in a 7mm Retumbo is superior IMO cuz it's an extreme temp powder, my tikka shoots 1/2 moa with it and 160 partitions, think the tikka im shooting 71 gr retumbo but that's off top of my head and dont have my log book handy
 
OP
T

Turner

Lil-Rokslider
Joined
Jun 20, 2017
Messages
241
Location
SD
ok good info, the 195 has me curious. anybody with any first hand experience with the Berger EOL 195's?
 

Archer86

WKR
Joined
Jun 28, 2019
Messages
381
Location
Greatest place on earth
I am guessing this is for a rem mag? I have had good luck with the 168 clasic hunter they are very friendly for seating depth vs the standard vld. Either should work though. Remeber to work up loads to max every rifle is different. I have had good luck with retumbo and h1000 with the 168 both getting over 3000 fps. With a 1 in 8 twist I would lean torward the 180 vld if you have time to do load work up. If your shooting out of a standard 7mm rem mag I dont think it will push the 195 with enough velocity to be worth it with out loading HOT rounds
 

desertcj

WKR
Joined
Jul 21, 2013
Messages
647
Location
Central CA
I realize this thread is a bit old. My 7mm mag load is a 180gr Eld-M molly coated, 73gr H1000, BR2 primer, Winchester brass. OAL is 3.450". Makes 3000fps in a 26" barrel. Don't try that much H1000 with a standard 3.290" oal and short throat. At least work up to it...
 
Top