Sold Alaska Guide Creations Bino Harness

Status
Not open for further replies.

JonathanT

FNG
Rating - 100%
2   0   0
Joined
Jun 29, 2018
Messages
65
Location
North Carolina
New Alaska Guide Creations K.I.S.S. Bino harness in multicam. I modified this harness to include hooks in lieu of autolock buckles at the top connection points. This is a common modification taken from this site to prevent slipping and works well. This harness he never been used in the field. I ended up going with a different harness thus the reason for selling. $85 to your door (lower 48) PayPal or Venmo. Thanks. Happy to answer questions.
 

Attachments

  • D1082BF4-AD0D-4AD8-B742-0C5FBE977090.jpeg
    D1082BF4-AD0D-4AD8-B742-0C5FBE977090.jpeg
    480 KB · Views: 62
  • 192DDFF8-0C91-4241-8DC1-2F1F863589EB.jpeg
    192DDFF8-0C91-4241-8DC1-2F1F863589EB.jpeg
    527.7 KB · Views: 63
  • 4F1EFC2F-B344-49A7-BAFC-7E6CCBDD28B2.jpeg
    4F1EFC2F-B344-49A7-BAFC-7E6CCBDD28B2.jpeg
    515 KB · Views: 56
OP
J

JonathanT

FNG
Rating - 100%
2   0   0
Joined
Jun 29, 2018
Messages
65
Location
North Carolina
The existing female buckle that attached to the harness was carefully cut and removed (see photo below of slit in buckle). No straps or any other part of the harness was cut, only the buckles were cut. The buckles could be added back to the harness and would work as originally intended. I run the non slip hooks on another setup and they work well (imo the hooks allow for the Bino holder to ride a little higher than using standard buckles if preferred. I will include original buckles with the harness. Also forgot to mention I upgraded the side strap buckles to auto lock buckles (I think I got the auto locks from kifaru if I recall correctly.
 

Attachments

  • 56B7D702-805E-4C3E-BC8B-E8E46E9310D5.jpeg
    56B7D702-805E-4C3E-BC8B-E8E46E9310D5.jpeg
    265.2 KB · Views: 11
Status
Not open for further replies.
Top