builtbybama16
FNG
- Joined
- Dec 31, 2020
- Messages
- 34
Hi everyone. It was briefly touched on in another thread but I figured I should dedicate a thread to this topic on its own. I’m looking for suggestions on some new arrows. I have a couple of options (head and insert weight) but what I’m leaning toward is the easton axis 300. I was shooting the 260 but I’m looking to shed a little weight and a little more forgiving spine. Here is my setup and the breakdown of the components. I’m wondering if I should use 100/125gr head and whether or not to use a brass or standard insert. I could probably have worded that a little better but here we are.
Mathews v3 31 at 28.5in draw at 75#
arrow cut to 29”
Shaft is 310.3gr
Vanes 18gr
Lighted Nock 20gr
125gr head and 50 grain insert = ~523fw
100gr head and standard insert = ~464fw
100gr head and 50gr Insert= ~498fw
Mathews v3 31 at 28.5in draw at 75#
arrow cut to 29”
Shaft is 310.3gr
Vanes 18gr
Lighted Nock 20gr
125gr head and 50 grain insert = ~523fw
100gr head and standard insert = ~464fw
100gr head and 50gr Insert= ~498fw