Arrow Spine Help

[wayoh22]

Hey all,

Quick question: Currently looking to get some new arrows and have been shopping around and have decided on the Nock On Easton Axis arrows. Setup is a 2019 Hoyt Nitrux, 72#, arrow length = 29.5in (cut to cut.) My question is when looking at the spine charts Duds provides, would you go up or down for spine? For example: the 50 grain inserts state for 29in = 300 or 260 spine and for 30in = 260 spine. Or do I have the freedom to go with either since I'm in-between at 29.5in?

Chart: https://www.nockonarchery.com/archery-gear/194-nock-on-axis-pro-series.html
Thanks

 

[scp]

Spine up. You’re at the upper end of the peak weight for that draw length and brass weight. 260.

 

[CApighunter]

My set up is very similar and I went with the 260s. Building them this week.

 

[HoytHunter24]

I would rather be a little more stiff than weak.