Arrow spine help

[Wilgabeast]

I’m shooting a new Hoyt torrex at 65 lbs with a 30” draw . I’m buying a dozen of the carbon express maxima red sd arrows . My question is should I get the 350’s of the 250’s

 

[nettereo16]

350s

No clue why but the CX arrow spine measurements are backwards - the 350s are stiffer than the 250s. With that draw weight/length you'll want the stiffer arrows.

A true spine measurement that the other manufacturers use the number decreases as the arrow gets stiffer

 

[Mighty Mouse]

350's if you plan to shoot "standard" to slightly heavy point weights. Go with 450's if you plan to put more than ≈150 grains on the front.

 

[Wilgabeast]

350's if you plan to shoot "standard" to slightly heavy point weights. Go with 450's if you plan to put more than 150 grains on the front.

No I plan to just shot qad exodus 125 grain heads

 

[dtrkyman]

Pushing into 450 terrain with the long draw! I would personally look into a different arrow, shot that shaft for the past 2 seasons, and when I hopefully tear em all up shooting 3d this summer I am moving on.