Arrow spine recommendation?

Joined
Apr 7, 2022
Messages
9
I am unsure about which arrow spine i should buy. I have a mathews vxr maxed out at 75# at 30” draw. If i want to shoot the black eagle x-impact the chart recommends a 250 spine. Except i also want to add the FOCUS system for a little extra point weight and reinforcement. Is a 250 spine too weak if i have 180 grains of point weight? Or should i bump up to the 200 spine?
 

Bump79

WKR
Joined
Oct 5, 2020
Messages
958
Have similar specs as you but 70#. I shoot X-Impacts or Element Storm 300 with 175 grains up front. I had to cut my arrow shorter than most like to get it to spine out.

I'd recommend 250 spine with 75#.
 
OP
K
Joined
Apr 7, 2022
Messages
9
Have similar specs as you but 70#. I shoot X-Impacts or Element Storm 300 with 175 grains up front. I had to cut my arrow shorter than most like to get it to spine out.

I'd recommend 250 spine with 75#.
Thanks for the reply and recommendation.
 
Joined
Jun 21, 2019
Messages
2,257
Location
Missouri
qSpine says 250 is perfect with a 30" carbon-to-carbon length at those specs.

Bow inputs: 344 fps IBO, 75# DW, 30" DL, 28" ATA, 6" BH, 85% LO
Arrow inputs: 30" C2C, 100 gr point, 80 gr insert, 9 gr nock, 3 vanes at 7 gr each
Screenshot_20220407-141303_qSpine.jpg
 

Hunt4Wade

FNG
Joined
Apr 13, 2022
Messages
10
I am unsure about which arrow spine i should buy. I have a mathews vxr maxed out at 75# at 30” draw. If i want to shoot the black eagle x-impact the chart recommends a 250 spine. Except i also want to add the FOCUS system for a little extra point weight and reinforcement. Is a 250 spine too weak if i have 180 grains of point weight? Or should i bump up to the 200 spine?
I run a V3X draw weight of 78.2lbs and 30” with 250 spine cut to 29”. 150 grain point weight. Seems to work well for me.
 
Joined
Jan 24, 2022
Messages
25
Ive found that a 29.75 300 spine rampage arrow with 205 up front had great FOC and flew nice out of #70lb 30” bow
 
Top