Up for sale is a barreled action in 300 WSM. I bought these components and put the rifle together about 1 year ago. Around the same time I ordered a full custom rifle, this rifle now sits in the safe unused. Specs are:
Action: ARC “Hunter” Mausingfield short action, magnum bolt face
Barrel: Carbon 6 prefit, 22” sendero profile, 1:10 twist, 300 WSM, 5/8x24 threads with 3 port muzzle break
Trigger: Bix n’ Andy tacsport
This is a “Hunter” Mausingfield that is cut for Wyatt’s extended box BDL or M5 style DBM. It has an open ejection port and 20 MOA pic rail. The pic rail was bedded and secured to the receiver with Devcon. I had the action and brake cerakoated black. It has not been used extensively, but there are normal wear marks in the cerakote on the bolt body and bottom of the action. I mostly shot factory ammo through it, the federal ammo using berger 185’s shot ¾” or less. I did not do extensive load development but threw together some loads using Nosler 210gr ABLR at that same ¾” groups. With some tuning I think it would tighten up some more. Total round count is right around 140.
I also have a bunch of reloading components if the buyer is interested. Hornady and Winchester brass, various dies, headspace gauges, and a selection of 30 cal bullets. I will work a deal for anyone interested in the whole package.
$1800 for the barreled action shipped CONUS. Reloading components extra depending on what buyer wants. Thanks for looking!
Mainly looking to sell, only trade interest would be a terminus Apollo lite action, or an allterra / axial prescion carbon hunter stock in short action.
Action: ARC “Hunter” Mausingfield short action, magnum bolt face
Barrel: Carbon 6 prefit, 22” sendero profile, 1:10 twist, 300 WSM, 5/8x24 threads with 3 port muzzle break
Trigger: Bix n’ Andy tacsport
This is a “Hunter” Mausingfield that is cut for Wyatt’s extended box BDL or M5 style DBM. It has an open ejection port and 20 MOA pic rail. The pic rail was bedded and secured to the receiver with Devcon. I had the action and brake cerakoated black. It has not been used extensively, but there are normal wear marks in the cerakote on the bolt body and bottom of the action. I mostly shot factory ammo through it, the federal ammo using berger 185’s shot ¾” or less. I did not do extensive load development but threw together some loads using Nosler 210gr ABLR at that same ¾” groups. With some tuning I think it would tighten up some more. Total round count is right around 140.
I also have a bunch of reloading components if the buyer is interested. Hornady and Winchester brass, various dies, headspace gauges, and a selection of 30 cal bullets. I will work a deal for anyone interested in the whole package.
$1800 for the barreled action shipped CONUS. Reloading components extra depending on what buyer wants. Thanks for looking!
Mainly looking to sell, only trade interest would be a terminus Apollo lite action, or an allterra / axial prescion carbon hunter stock in short action.
Attachments
Last edited:
