Blackhorn 209 compatible breech plug for CVA Maghunter

Joined
Apr 26, 2020
Messages
87
My dad bought a CVA Maghunter at an auction for $50. The breech plug needs replaced. Currently, it is seized in place but I think I can get it out. If I get it out, does anyone make a Blackhorn 209 compatible plug?

Sent from my SM-G970U using Tapatalk
 

FrontierGander

Lil-Rokslider
Joined
Jan 19, 2020
Messages
259
Location
CO
I always used a factory CVA hex head breech plug and corrected the head spacing on the bolt for a snug primer fix. Zero issues with hang fires.

Right bolt face mod is a 12mm freeze plug. I turned the firing pin down a lot smaller.

 
OP
cmwhitmoyer
Joined
Apr 26, 2020
Messages
87
Got the breech plug out. Took a little heat from the propane torch.Now to get a replacement plug.

Sent from my SM-G970U using Tapatalk
 
OP
cmwhitmoyer
Joined
Apr 26, 2020
Messages
87
Where do you get the 12mm freeze out plugs?


Sent from my SM-G970U using Tapatalk
 

FrontierGander

Lil-Rokslider
Joined
Jan 19, 2020
Messages
259
Location
CO
thats the hard part. I only had one from a carb rebuild kit for a boat. I would try local part stores or ebay.
 
Top