Bullet Exchange/Trade 2.0

[RMajors]

I know this was recently discussed, but the thread was a bit long, so I thought I'd start a new one. If this is not allowed, feel free to take it down admins. I'm not trying to hijack or anything.

I have several premium .257 bullets to trade:

Berger VLD Hunting 115 grain - 94
Barnes TTSX 100 grain - 41
SOLD Nosler AccuBond 110 grain - 42 SOLD
Nosler Ballistic Tip Hunting 100 grain - 43

I'm looking for:

Barnes LRX 127 6.5mm
Barnes 6.5mm of any kind
Barnes 7mm in the 130-150 range
Barnes .308 (anything heavier than 130)
Sierra Matchking .308 168, 175 grain
I could use a good set of small base 6.8 SPC dies, small base 223 sizing die, a Forster micrometer seater die for 300WM, 7mm RM, 308 Win, or 223 Rem. Could also use a bushing style full length die for 308 Win. A high quality brass trimmer could be another option for trade as well. I could use a good torque driver too, like a FAT wrench or even better a Real Avid torq smart. PM me if you have something to trade.

 

[rootacres]

I know this was recently discussed, but the thread was a bit long, so I thought I'd start a new one. If this is not allowed, feel free to take it down admins. I'm not trying to hijack or anything.

I have several premium .257 bullets to trade:

Berger VLD Hunting 115 grain - 94
Barnes TTSX 100 grain - 41
Nosler AccuBond 110 grain - 42
Nosler Ballistic Tip Hunting 100 grain - 43

I'm looking for:

Barnes LRX 127 6.5mm
Barnes 6.5mm of any kind
Barnes 7mm in the 130-150 range
Barnes .308 (anything heavier than 130)

I could use a good set of small base 6.8 SPC dies, small base 223 sizing die, a Forster micrometer seater die for 300WM, 7mm RM, 308 Win, or 223 Rem. Could also use a bushing style full length die for 308 Win. A high quality brass trimmer could be another option for trade as well. I could use a good torque driver too, like a FAT wrench or even better a Real Avid torq smart. PM me if you have something to trade.

Hey man,

I have 76 left of the 150gr ELDX 7mm bullets. I know its not on your list but their BC is what drew me to them. Just can't load them long enough in my SAAMI spec WSM.

I also have 17 of the 168 gr TTSX 30cals, and ill throw in 17 more of the 178gr ELDX 30 cal pills if you want them.



I have:
7mm
76 - 150gr ELDX

.308
17- 168gr TTSX
17 - 178gr ELDX


I am looking for:
7mm
139-168gr Bergers, Accubonds, TTSX, LRX

 

[RMajors]

Hey man,

I have 76 left of the 150gr ELDX 7mm bullets. I know its not on your list but their BC is what drew me to them. Just can't load them long enough in my SAAMI spec WSM.

I also have 17 of the 168 gr TTSX 30cals, and ill throw in 17 more of the 178gr ELDX 30 cal pills if you want them.



I have:
7mm
76 - 150gr ELDX

.308
17- 168gr TTSX
17 - 178gr ELDX


I am looking for:
7mm
139-168gr Bergers, Accubonds, TTSX, LRX

Thanks for the input

 

[MT257]

message sent

 

[RMajors]

.

 

[ericwh]

I have 1 full, but opened box (50) of 6mm barnes 80gr ttsx. About half of them were loaded and then pulled.

I have 1 full, unopened box (50) of .224 77gr Sierra MK and one ~1/2 full box of the same.

I can buy and trade you 77gr Tipped Matchkings

Interested in:
.224 Hornady 75gr ELD-M
Federal Large Rifle Primers

 

[RMajors]

Last chance on these .257 bullets. I'm leaving tomorrow for a 5 to 6 month job in Minnesota. I can still get them out today if anybody needs them.

 

[TX_Diver]

I'd strongly prefer just one running thread, or maybe a thread per month or something, but multiple threads at the same time is hard to track.

That said (and as I posted on the other thread)

Looking for
.308 Nosler Accubonds - Prefer 180gr, may consider a box or 2 of 165s
May consider .308 165gr or 180gr partitions also.

Have
1 box 22cal Hornady 75gr .224 75gr BTHP (100 pcs)
2 box 22 cal Nosler Varmageddon .224 55gr FB tipped (200 pcs)
1 box 22 cal Nosler Ballistic Tip .224 60gr Spitzer (100 pcs)

Not really looking to sell but would trade for .308 bullets.

 

[Haney]

I know this was recently discussed, but the thread was a bit long, so I thought I'd start a new one. If this is not allowed, feel free to take it down admins. I'm not trying to hijack or anything.

I have several premium .257 bullets to trade:

Berger VLD Hunting 115 grain - 94
Barnes TTSX 100 grain - 41
SOLD Nosler AccuBond 110 grain - 42 SOLD
Nosler Ballistic Tip Hunting 100 grain - 43

I'm looking for:

Barnes LRX 127 6.5mm
Barnes 6.5mm of any kind
Barnes 7mm in the 130-150 range
Barnes .308 (anything heavier than 130)
Sierra Matchking .308 168, 175 grain
I could use a good set of small base 6.8 SPC dies, small base 223 sizing die, a Forster micrometer seater die for 300WM, 7mm RM, 308 Win, or 223 Rem. Could also use a bushing style full length die for 308 Win. A high quality brass trimmer could be another option for trade as well. I could use a good torque driver too, like a FAT wrench or even better a Real Avid torq smart. PM me if you have something to trade.

The other thread is only four pages, why do you feel you need to make this all about you ? Why not start your very own classified ad ? It was very apparent to you this was a bad idea if you mentioned the admins taking it down .

 

[Ryan Avery]

No trading outside of the classifieds