bullets sticking in die

ST52v

WKR
Joined
Jul 12, 2012
Messages
637
Has anyone had issues with accubonds or any other bullets sticking in the seating die?? Any thoughts on causes or solutions?? Thanks Robin
 

Shrek

WKR
Joined
Jul 17, 2012
Messages
7,069
Location
Hilliard Florida
I haven't had it happen to me but it happens. Is it a new die ? If so you need to take it apart and clean it really well then look if there are any tool marks in the seater. You may want to ask this question over at longrangehunting . There are some unbelievably experienced loaders over there . What brand of die is it ?
 

oldgrowth

Lil-Rokslider
Joined
Jan 1, 2013
Messages
286
Location
california
Does this only happen with accubonds? If so, check to see if the taper of the bullet is fatter than the taper of the seating dies seating plug.
 

Sea37

FNG
Joined
Nov 17, 2012
Messages
60
Location
Az
I had it happen to me using rcbs dies. I had to go really slow and easy during the seating proccess.
 
OP
S

ST52v

WKR
Joined
Jul 12, 2012
Messages
637
Thanks Guy's! ! It was a new RCBS die and the AB's were the first on the list. After two trys and two stuck bullete it started to work fine. I guess I finally got it clean enough ect...
 
Top