Christensen Arms Mesa

RadUtah

FNG
Joined
Jan 13, 2020
Messages
8
Hi All
Wanted to share my experience with this rifle.
I was convinced by a gun shop to buy and check out the Mesa. I purchased a 7mm Rem Mag. I followed the break in process outlined in the web site.
On this gun I have a Leupold vx5. The new 6-24.
During break in I shot cheap Federal blue ammo in 150 grain. I have to admit that is shot .6 with this setup...pretty impressive.

I then hand loaded 162eldx, in Nosler brass. I use imr 4831 powder.

In my next outing I was shooting .5 moa. We shot out to 600 yards and had no problem ringing the 18 inch gong.

I am very impressed, especially since I was very skeptical.

Hope that helps anyone out there.
 

mlob1one

WKR
Joined
Mar 18, 2015
Messages
430
Happy to hear it. I'm planning on picking a Christensen next month.

Just curious, where'd you buy it?

Sent from my SM-G970U using Tapatalk
 

archp625

WKR
Joined
Jan 17, 2018
Messages
2,033
Location
St. Joseph, Missouri
Excellent Report. Do you feel The weight of the gun with optic is too much or just about right? Do you know the weight of your set up. I want to purchase a CA just cant decide if the ridgeline is worth the 0.3 lbs difference.
 

eoperator

WKR
Joined
Apr 4, 2018
Messages
1,076
Just bought a Ca mesa 6.5cm I've never seen a production rifle group like that with factory ammo.👍 to CA. Sent it off to mesa precision for an altitude stock. All smiles from this guy😁😎😁😎😁😎
 
Joined
Jun 25, 2019
Messages
28
Location
UT
Excellent Report. Do you feel The weight of the gun with optic is too much or just about right? Do you know the weight of your set up. I want to purchase a CA just cant decide if the ridgeline is worth the 0.3 lbs difference.
Iv got close to the same set up and I’d say it’s a little on the heavy side but still manageable
 
Joined
Jul 8, 2018
Messages
433
Location
Great Smoky Mountains
This is good to hear. I picked up a Mesa in 6.5 cm for a really good deal. Used with only 40 rounds through it. I was not in the market for one but felt like the deal was too good. Looking forward to some load testing.
 

TexasCub

WKR
Joined
Mar 1, 2015
Messages
587
Location
Colorado Springs
I’ve owned just about every brand of rifle and my CA Mesa in 6.5 PRC is the most accurate rifle I’ve ever owned. I’ve shot the two factory loads through it and my handloads with 139 Scenars and everything groups amazingly through it.
 

Attachments

  • 9558A1F2-2D32-463A-AEE8-0FF4507E51D7.jpeg
    9558A1F2-2D32-463A-AEE8-0FF4507E51D7.jpeg
    122.5 KB · Views: 63
  • F2D25400-36E4-44BB-87E2-9A26B72AB7C6.jpeg
    F2D25400-36E4-44BB-87E2-9A26B72AB7C6.jpeg
    206.6 KB · Views: 64
  • D1DE5F3D-ED05-42A5-9B9B-61D5D4FC17E6.jpeg
    D1DE5F3D-ED05-42A5-9B9B-61D5D4FC17E6.jpeg
    206.8 KB · Views: 64

BBB

FNG
Joined
Sep 13, 2013
Messages
20
I’ve heard good stuff about this setup. Great choice in the mid tier rifles with top end accuracy
 

Motown

WKR
Joined
Dec 11, 2019
Messages
409
Texascub it looks like you got one hell of a rifle there!

Any idea of the actual weight on the PRC? They are using a short action for the PRC correct?
 

archp625

WKR
Joined
Jan 17, 2018
Messages
2,033
Location
St. Joseph, Missouri
Texascub it looks like you got one hell of a rifle there!

Any idea of the actual weight on the PRC? They are using a short action for the PRC correct?
Motown, The 6.5 PRC MEsa comes in at 6.8. I have heard guys say that they are more in the 7.0 range. The Ridgeline comes in at 6.5 lbs.
 

Motown

WKR
Joined
Dec 11, 2019
Messages
409
Motown, The 6.5 PRC MEsa comes in at 6.8. I have heard guys say that they are more in the 7.0 range. The Ridgeline comes in at 6.5 lbs.
[/QUOTE]

Thanks Arch. I know that advertised weight vs actual vary widely sometimes so wasn't sure with the Mesa.
 

Motown

WKR
Joined
Dec 11, 2019
Messages
409
One more question for you CA guys. Im thinking I am going to go with either the Mesa or Ridgeline. I would not be running a rail and would most likely be using talley lightweight lows. I will most likely be using a Tract Toric with a 42mm obj so does anyone know if I would run into bolt or objective clearance issues with this setup?
 

Txrookie

Lil-Rokslider
Joined
Oct 10, 2018
Messages
241
My brother got a .243 ridgeline last week and shot a .5” group with factory hornady, I was impressed
 

archp625

WKR
Joined
Jan 17, 2018
Messages
2,033
Location
St. Joseph, Missouri
One more question for you CA guys. Im thinking I am going to go with either the Mesa or Ridgeline. I would not be running a rail and would most likely be using talley lightweight lows. I will most likely be using a Tract Toric with a 42mm obj so does anyone know if I would run into bolt or objective clearance issues with this setup?
I just set up my Ridgeline tonight. I have the high Hawkins Hybrid rings, 56 mm Nightforce and a Seekins rail. The gun comes in at 8 lbs 12 ozs. With my Atlas CAL it’s 9 lbs 12 ozs.

I would look into Hawkins Hybrids instead of Talley’s. They are so nice plus a bubble level built in. You will need the lows for a 42 mm scope.
 

Motown

WKR
Joined
Dec 11, 2019
Messages
409
Handled a mesa today and it felt like a solid rifle. Do the mesa and ridgeline have the same stocks?
 
Top