dirtdriver28
FNG
anyone get there hands on the new Accura X-treme yet. Hoping to get one and dial it in before co. elk season.
Put a straight edge on the top of the barrel and see if it is bent. Not kidding, I've seen a couple straight out of the packaging that were and did what you describe. One CVA Optima and one TC Encore. Both were interesting phone calls for warranty claims. "we don't ship bent barrels" Well, it turns out, yes, you do. Both were replaced under warranty.Heck, I can't even get my Accura V2 on target........at 50 yards. I bought the CVA to shoot conicals because of the T/C's reputation for inaccuracy with full bore conicals, and even with the rear sight all the way up it's still hitting a foot low........at 50 yards. Shooting 420gr No Excuses with 100gr BH209 and CCI 209M primers. Looks like my daughter will be shooting the T/C if I can't get this thing right.
I put one on the length of the barrel and it appears to be fine.Put a straight edge on the top of the barrel and see if it is bent.
I put one on the length of the barrel and it appears to be fine.
Worth a try.I put one on the length of the barrel and it appears to be fine.
Why would you use so much BH209 for such a light for caliber lead conical?Shooting 420gr No Excuses with 100gr BH209 and CCI 209M primers.
Why would you use so much BH209 for such a light for caliber lead conical?
I bet it’s 100gr by volume.Heck, I can't even get my Accura V2 on target........at 50 yards. I bought the CVA to shoot conicals because of the T/C's reputation for inaccuracy with full bore conicals, and even with the rear sight all the way up it's still hitting a foot low........at 50 yards. Shooting 420gr No Excuses with 100gr BH209 and CCI 209M primers. Looks like my daughter will be shooting the T/C if I can't get this thing right.
Of course it's by volume. I also tried 80gr and 90gr as well.I bet it’s 100gr by volume.
I have a CVA that did this same thing. CVA “accidentally “ put in front sights that were too tall. Measure how tall the front blade is from barrel to top of blade, if it’s taller than half inch than you need to order or get them to send you a new rifle sight. It’s been a common issues with CVA muzzysHeck, I can't even get my Accura V2 on target........at 50 yards. I bought the CVA to shoot conicals because of the T/C's reputation for inaccuracy with full bore conicals, and even with the rear sight all the way up it's still hitting a foot low........at 50 yards. Shooting 420gr No Excuses with 100gr BH209 and CCI 209M primers. Looks like my daughter will be shooting the T/C if I can't get this thing right.
That makes the most sense. Measured this one at just under 3/4". Will contact CVA. Thank you.I have a CVA that did this same thing. CVA “accidentally “ put in front sights that were too tall. Measure how tall the front blade is from barrel to top of blade, if it’s taller than half inch than you need to order or get them to send you a new rifle sight. It’s been a common issues with CVA muzzys
They should send you one for free that is about a 1/2” tall. You’ll be good after that. Mine shoots lights out with most loads and bullets combos. Here is a bull I got last year. Just over 90 yards with a powerbelt platinum aerotip. High lung went 40 yards and tipped over. 270 powerbelt in front of two white hots has been the most consistent and accurate combo for my muzzyThat makes the most sense. Measured this one at just under 3/4". Will contact CVA. Thank you.