DIY barrel stove

[Justin.Medcalf]

Hey guys I am gonna make my own barrel stove from Ti foil and stainless end plates. I am going to use 18x36 inch foil with a 10.5 inch diameter end. My question is about the length of foil, if I do the 36 inch long by 18 inch foil that will leave me a 3 inch overlap as long as my math is right. I am just wondering if that is enough overlap for the stove body? Anybody that has tried this and can give advice would be greatly appreciated!

Thanks,
J

 

[couesbitten]

Should be plenty, I made my own as well and have somewhere between 2 - 3 inches.

 

[Justin.Medcalf]

Should be plenty, I made my own as well and have somewhere between 2 - 3 inches.

Ok thanks a bunch!

 

[reaper]

Just put some cable rings to be sure it doesn't open with a fire going

DIY stoves or so fun to do.

Envoyé de mon Pixel 2 en utilisant Tapatalk