Sep 22, 2021 #1 M MT257 WKR Rating - 100% 18 0 0 Joined Sep 25, 2016 Messages 1,222 Sold Last edited: Oct 6, 2021
Sep 23, 2021 #2 RockinRam96 WKR Rating - 100% 6 0 0 Joined Jan 18, 2021 Messages 408 Location Clifton Springs, NY Any easy way to pull the insert? I’d be interested in these but need them cut at 26-1/4”. Plus I shoot 75 grain brass inserts. Sent from my iPhone using Tapatalk Last edited: Sep 23, 2021
Any easy way to pull the insert? I’d be interested in these but need them cut at 26-1/4”. Plus I shoot 75 grain brass inserts. Sent from my iPhone using Tapatalk
Sep 23, 2021 Thread Starter #3 OP M MT257 WKR Rating - 100% 18 0 0 Joined Sep 25, 2016 Messages 1,222 You'd be able to obtain that length by cutting the rear end of the arrow shaft. The epoxy was used that came with the HIT inserts. I've never tried pulling them before. You could add a collar of some sort to get your up front weight.
You'd be able to obtain that length by cutting the rear end of the arrow shaft. The epoxy was used that came with the HIT inserts. I've never tried pulling them before. You could add a collar of some sort to get your up front weight.
Sep 24, 2021 Thread Starter #4 OP M MT257 WKR Rating - 100% 18 0 0 Joined Sep 25, 2016 Messages 1,222 $260 tyd
Sep 25, 2021 Thread Starter #5 OP M MT257 WKR Rating - 100% 18 0 0 Joined Sep 25, 2016 Messages 1,222 Ttt
Sep 26, 2021 Thread Starter #6 OP M MT257 WKR Rating - 100% 18 0 0 Joined Sep 25, 2016 Messages 1,222 $250tyd
Sep 28, 2021 Thread Starter #7 OP M MT257 WKR Rating - 100% 18 0 0 Joined Sep 25, 2016 Messages 1,222 $240tyd