WTS/WTT Full Custom (Sherman Short Mag) Rifle

Brianc74

WKR
Rating - 100%
13   0   0
Joined
Oct 14, 2019
Messages
632
Location
Middleton Idaho
I have a full custom rifle chambered in 300 Max for sale. Rifle has barrel only broke in. Only shot 2 bullets to get powder pressures. So far it’s shooting at 1/2” at 100 yards fifth no seating depth checks so far at 2820fps. This is with a Berger 205 Elite Hunter bullet and over 3000fps with Barnes 175 LRX bullets. Wight of rifle as seen in the picture is 8lbs 12 oz. Hers the build specs :
1. Ruckus XM action and bottom metal all black nitrided then all metal cerakoted except bolt
2. Altera stock with flush cups and built in Spartan bipod setup and pillar bedded with Devcon
3. Bartien #3 ss 1-10 twist barrel spiral flutes with 9/16 24 muzzle thread at 20”
4. 2 stage Trigger Tech trigger currently set at 1. 8lbs
5. Spartan bipod long, as the stock is setup for this
6. Little Bastard Gen 2 self timing 3 port break and also a tread adapter 9/16 24 to 5/8 24 for suppressor
Rifle will come with Hornady die set and 50 pieces of the 40 deg 300 max brass by ADG, and Spartan bipod
Scope, rings and a hard case available for extra. $4700 plus shipping
Now on other forums
image.jpgimage.jpgimage.jpg
 
Last edited:
OP
Brianc74

Brianc74

WKR
Rating - 100%
13   0   0
Joined
Oct 14, 2019
Messages
632
Location
Middleton Idaho
(Gearguywb)
HandgunHTR is correct.
I only have tried 2 different types of bullets during barrel break-in. The Berger 205 Elite Hunter and the Barnes 175 LRX bullets. I wanted to get to the high pressure mark with each of those two bullets for load development. As these two bullets are what I planed to be shooting with the rifle. Round count is at 70.

Brian
 
Last edited:
Top