Got My Iron Will Snyder Cores

[Paridgerunner]

Took quite awhile but glad to have them in time. These r the 160gr wides. The collar adds 10gr making it 170gr and I can go up from there. Currently shooting Ethics hardware to see what weight my setup shoots best then will go from there. Shooting the new 4mm axis and will probably end up somewhere between 500-550gr.

 

[H80Hunter]

I’m stoked for mine. I’ve had them a while but I got the 135 grain wide (and a few 135 single bevels) and 25 grain collar. They shoot great.

 

[Paridgerunner]

I’m stoked for mine. I’ve had them a while but I got the 135 grain wide (and a few 135 single bevels) and 25 grain collar. They shoot great.

Had the 125 S in deep six, done w that shit. Sold em cheap. What's the .O.D of arrow and collars? My arrows r .249 my collar .246 and I sand arrow. Rather be under than over.

 

[H80Hunter]

I’ve got the 340 spine axis 4mm. The od of the arrow is 0.234 and I buy the 0.238 collars (c25-F). They fit perfect. And even if I switch I’ll never go back to epoxy, hot melt is the way to go for sure.

Another thing, I’ve mentioned in another thread: I have some exodus 100 deep six that I screwed a 50 grain IW hit into all the way. Then I use the 10 gr Ti collar, glue it all right in, and I’ve got the same weight up front ad my IW broadheads and it costs about half as much.