vectordawg
Lil-Rokslider
Last week everything on my bow was good. First, I paper tuned with bare shafts and when that was done my field points hit with the bare shafts. I even busted a couple of nocks. Next, I got my 40 sighted in but only vertically. Then I worked on left and right. I was dead on out to 50 just aiming at a vertical strip of tape. Then I put on an Ironwill v100 and they flew like darts. I’ll attach a pic. Then I worked on the rest of the pins and everything was good. Here’s where it goes to crap. Friday night as I was putting everything away I double checked the tightness of all the screws and I accidentally turned my 3rd axis screw. I didn’t realize it until Saturday morning when my arrows were hitting 8-10 inches right. I was able to get it close but I had to redo all 3 axis today. This where I’m stumped. Out to 30 yards bh and fp hit together. As soon as move out to 40 and beyond, the bh hits 4 inches right of my fp. Any ideas? I don’t think moving the rest is the answer because it was dialed in until my dumb ass adjusted the sight. I double checked cam timing with a draw board before I made this post.
Thanks,
Ryan
Oh, and I leave for WY Sunday. That’s why I’m in a bind.
Thanks,
Ryan
Oh, and I leave for WY Sunday. That’s why I’m in a bind.