I LOVE my SG pack systems but I need more pockets and $h1t

Dunky

Well Known Rokslider
Joined
Jan 27, 2015
Messages
227
For a day hunting pack I’ve been using an exo 1850 on a Krux evo frame. It fits pretty well.
 

Dunky

Well Known Rokslider
Joined
Jan 27, 2015
Messages
227
How did you make it fit?
I’ll try to post some pictures tonight. I ran the top straps of the SG frame through a add on buckle at the top of the exo. Wrapped the Velcro flap around the frame. You need to swap the frame buckles for ones that mate with the exo pack The bottom straps feed right through the existing exo buckles.
 
Joined
Nov 14, 2021
Messages
2
F27F21A2-4C5E-4F5C-8916-E7C780E438A1.jpeg I’ve been using a kifaru straight jacket on my r3 frame. It was prett easy to make work with a few tri slides. Is the most comfortable weight hauler I have..
 
Joined
Nov 14, 2021
Messages
2
E6CCD3CF-55B1-4EFA-B26E-23D7B2694DF6.jpeg F7D884FD-FF75-47F7-B211-9A385AA1D69A.jpeg F8452927-FD98-47BF-B815-A1553C17688D.jpeg 8CFCC3B1-CBB7-4730-B683-E48A87967CB9.jpeg I’ll try this weekend.
The pack fits great. I had to abandon the SG lifters and attach to the top of the kifaru bag. It works well. The straps on the bottom of the frame line up with the bag attachment points on the bag so it conchs down really well. I then made loops using trislides on the side straps to to hold the kifaru side release buckles and ran the straps back through so they are still usable. If I were to make it permanent, there is a lot of stuff I would probably cut off but the SG bag may get used again. I do like this setup better as the frame is more comfortable for me than the duplex.
 
Top