Iron Will Titanium Impact Collars

Bill V

WKR
Rokslide Sponsor
Joined
Jan 24, 2017
Messages
484
Location
Colorado
Many bowhunters have benefited this year from our 1.0 inch long, 25 grain, hardened steel Impact Collars on bone splitting impacts. Some people were not able to get this advantage without being underspined on their current arrow setups. To meet these needs, we have made a 0.7 inch long, grade 5 titanium Impact Collar weighing only 10 grains. As a few of you have noticed, I've been shooting these all season with great results. Now you can choose high strength arrow reinforcement at the weight that works best for your setup. CNC machined in the USA for the ultimate in precision.

c10 Impact Collars: Grade 5 Titanium. 0.7 inch, 10 grains
c25 Impact Collars: Hardened Steel, 1.0 inch, 25 grains

We make these for .204 ID arrows (5mm Axis & FMJ, RIP TKO, Gold Tip Kinetic, Black Eagle Rampage) to be used with standard thread HIT inserts and also for .166 ID arrows (Easton 4mm Carbon Injection, FMJ Injections, Gold Tip Kinetic Pierce) to be used with Deep Six HIT inserts. We also make premium hardened steel HIT inserts which we manufacture under a license agreement with Easton Archery.

Let me know if you have any questions on how these can work for your setup.
ti_collars.jpg
 

nphunter

WKR
Joined
Jul 27, 2016
Messages
1,699
Location
Oregon
It's great your making these components. I really like the collars and have had great luck, I have still hit targets hard enough that even though the collar saved the arrow the brass HIT bent so the arrow wouldn't spin true. I'm excited to try the hardened steel HIT's, hopefully they will mitigate the bending as well.
 
OP
Bill V

Bill V

WKR
Rokslide Sponsor
Joined
Jan 24, 2017
Messages
484
Location
Colorado
nphunter, thanks for the feedback. Yes, brass or aluminum HIT inserts are pretty soft and will bend much easier than our hardened still HIT inserts.
 

Trial153

WKR
Joined
Oct 28, 2014
Messages
8,187
Location
NY
Here is a oz cut ultra four which is basicly a 4 bladed QAD, its ove the Steel collar...
7d8fa8427940d616dc04737466efb425.jpg
 
OP
Bill V

Bill V

WKR
Rokslide Sponsor
Joined
Jan 24, 2017
Messages
484
Location
Colorado
I've had a few questions on arrow compatibility so I've updated the chart on our website and attached it here.130236
 

Zac

WKR
Joined
Dec 1, 2018
Messages
2,214
Location
UT
Both of these shafts survived just fine after direct boulder hits😬
 

Attachments

  • 20200523_153015.jpg
    20200523_153015.jpg
    120.6 KB · Views: 72
  • 20200523_152940.jpg
    20200523_152940.jpg
    138.2 KB · Views: 70

Zac

WKR
Joined
Dec 1, 2018
Messages
2,214
Location
UT
Oh I just picked up the Ironwill HIT insert tool as well, pure genius that design. The plastic Easton ones won't even make it through a whole batch of shafts sometimes.
 

CakeEater

FNG
Joined
Jul 26, 2016
Messages
17
Looks like BE X-Impacts run .256” OD and the C25-D/C10-D IW collars are .2540” ID. Lil bit of sanding? Bill V is pretty active here and I’m sure your could reach out. I’ve got a set for my Axis 260 Pro and am about to purchase some for the 300 and 340. Best of luck


Sent from my iPhone using Tapatalk
 
Top