Iron Will v125 broadheads and Tightspot quiver?

[buggz]

Anyone use Iron Will v125 broadheads with their Tightspot quiver?
Seems it is a close fit for the broadhead?

Iron Will v125 specs:
"vented, 1 1/16" cutting diameter main blade."

Tightspot:
"Tightspot won’t fit large diameter fixed blade broadheads over 1 3/16 inches."

 

[Billy Goat]

Ironwill s125 will fit fine, don't know about the wides.


Exodus is very tight.

 

[buggz]

Good to know about the Exodus, was wanting to try those as well.

So, it does work?

 

[Billy Goat]

The Exodus fits, but it rubs the sides a little, and it can be complicated with blade rotation.

 

[KBC]

I fit 3 wides and 2 vented 125s in my 7 arrow tight spot. I don’t put 7 in even with field points so I don’t know if 7 IWs fit. I alternate wides and vented, first shot is a wide, then the vented, then wide in the middle etc.

Edit to add: I do have to put them in carefully to make sure the angle of the BHs won’t hit things when pulling them out but I bet I could fit 5 wides in if I wanted.

 

[Trial153]

Took 5 V125s in a tight spot to Alaska this August....no problem

 

[buggz]

Thanks for all the informative replies!

Looks like I'm going to get a Tightspot quiver.

 

[5MilesBack]

Heck, I've used 125gr 1.5" 3-blade cut Ramcats in my Tightspot quiver without any issues. This year I used QAD Exodus without any issues either.

 

[Reburn]

I can get 3 wides and 2 S or V in a 5 arrow tight spot. It will drive you crazy if you want your fletchings to be all matchy matchy at the bottom though.