Sold Kifaru Door Gunner

[Squirrels]

Coyote Brown with Medium Belt
I have done some useful mods to this one. If you have any questions about it just ask.

• 2 molle tabs added to the front face at the top
• 3 tab loops added to each side of the pack for attaching additional compression straps/sherman/etc
• The divider in the lid pocket that separates the internal zipper and outside zipper of the lid pocket has been removed, turning it into a larger, more functional pocket. I always found the two pockets held so little due to the divider. Now it serves as a pass through style pocket that can be accessed from either side.
• I never liked how the pack collapsed in on itself from the sides due to the lack of a frame sheet. The two stays now stay rigid and separated with structure. There is a piece of 1/8" thick HDPE inside a piece of 1" tubular webbing, that is then attached to the end of each stay with a allen head machine screw. This can be easily remove with no ill effect if you don't want it by simply removing the two screws.

Setup runs $400 these days depending on your state sales tax

$250 plus actual shipping cost; PayPal friends and family only, I've sold plenty here and can provide references. (if you want it insured that cost will be extra)

 

[Squirrels]

BUMP

 

[tyler.klinesteke]

Free bump, good seller, and you can guarantee that whatever modifications were done were done well. Love the idea of the pass through top pocket.


Sent from my iPhone using Tapatalk

 

[Squirrels]

Free bump, good seller, and you can guarantee that whatever modifications were done were done well. Love the idea of the pass through top pocket.


Sent from my iPhone using Tapatalk

Thanks bud. If you have a door gunner and want that pass through style pocket all you need is a sharp pair of scissors. Go slow, just cut the divider out as close to the seam as possible.