Kifaru/ Stone Glacier

Joined
Jun 26, 2017
Messages
449
Tried out a muskeg 2800 on an x curve. Works pretty good the top sleeve is a little loose but works good.
95525aefb4cc3967e327e6fef6e5b18d.jpg
The side compression straps all lined up.
dd9c7fec51f4f681dc533927fabbc04d.jpg
The bottom straps work good to keep the bag tight. You could run it through the common loop or skip it.
5f4433e5bf67ef38f78e695171a8512f.jpg
31e82a24b6eba8c7193f629e9db100b2.jpg
Idk how the nomad is but I figure you could make it work with a couple buckles.

Sent from my SM-G950U using Tapatalk
 
Joined
Jun 26, 2017
Messages
449
When is empty or light loads is probably the most comfortable pack I've tried. But with more weight it seemed to be pressured more on my lumbar and shoulder pads vs the kifaru was more of an even distribution. It is very comfortable for how lightweight it is.

Sent from my SM-G950U using Tapatalk
 

*zap*

WKR
Joined
Dec 20, 2018
Messages
7,129
Location
N/E Kansas
I am putting a AMR on my x-curve. Seems pretty straight forward the tops of the stays go right thru the holes in the sleeve on the AMR. The load lifter strap goes right thru and there is a second strap that goes right thru with it. I am probably going to run that second strap down to a pals webbing loop on the sides of the AMR to keep the stays from slipping thru the sleeve holes too much. If I like it I will probably sew some sleeves on the back of the pack top under the sleeve for the stays and leave a hole at the top for the load lifter strap to slip thru. The rest of the straps line up pretty well.
 
Joined
Jan 11, 2020
Messages
3
So do your kifaru buckles plug into stone glacier buckles? Is the compression strap webbing is the same size on kifaru and stone glacier?
 

Thor45

FNG
Joined
Oct 30, 2019
Messages
13
Curious if anyone has tried to run a kifaru sherman pocket on SG Xcurve or SG pack? I have the sky 5900 but looking to try this out.? Just wanted to check first.
 
Top