Jaker_cc
WKR
Did they stop making the annex for the supertarp?
At the moment yes, pretty happy i bought a second run paratarp annex few months back.Did they stop making the annex for the supertarp?
Where did you get measure for the super im sure i can figure it out but if you have the measurements i would appreciate that.Check the DIY gear forum. Maybe some of the guys who make stuff from silnylon could help. I made one for myself, but probably never again because my patience wears out working with that material.
Good call on off setting the zipper i even thought about using some sort of clip system to just unclick one corner so it can fold freeI just set up the ST and took some measurements where I thought things should be. It isn’t pretty but it does the job. If you make one, don’t forget to use a double sided zipper pull. Also, I wish I’d have rigged the zipper down the middle of one side rather than down the centerline. It would be easier to reach from inside.
I emailed Kifaru support about this yesterday... I was told "the annex has taken a back seat to some more pressing items. It won't be anytime soon."Did they stop making the annex for the supertarp?
I did this with the annex I built. It works well, access from either side by simply un-clipping an ultralight carbiner.Good call on off setting the zipper i even thought about using some sort of clip system to just unclick one corner so it can fold free
Here is the measurements for the kifaru paratarp annex. Hope this helps you at allWould any of you who made your own annex be willing to share pictures or insights? I have a 10x10 flat tarp. I've sketched out two annex/vestibules I plan to sew. Just unsure of some of the details and can't find good information on sewing zippers. I plan to eventually put a stove Jack in one of the vestibules.
Paratarp with aftermarket annexWould any of you who made your own annex be willing to share pictures or insights? I have a 10x10 flat tarp. I've sketched out two annex/vestibules I plan to sew. Just unsure of some of the details and can't find good information on sewing zippers. I plan to eventually put a stove Jack in one of the vestibules.
Thanks a lot! This is helpful. I put the project aside for while but am getting back to it. I forgot where i left off, having the dimensions of the annex is a huge help.Paratarp with aftermarket annex