Prices lowered!
Prices via PayPal include USPS priority and the PayPal fee. Kydex sheaths fit Spyderco Gclips (not included) and the leather sheaths are available except the BushCamp and Cub are a combo leather sheath.
Spyderco RWL-34 with blue cork. $120
This knife has mating wear on the edges of the cork where the sheath goes over it. The pins are steel, and the grip is fairly thin. This steel reportedly has good toughness and is easy to get sticky sharp. The sheath can accept a Gclip, but it is not included. From Spyderco, "RWL 34's alloy composition is as follows: Carbon - 1.05%, Manganese - 0.50%, Silicon - 0.50%, Chromium - 14.0%, Molybdenum - 4.00%, Vanadium - 0.20%. This advanced alloy mix makes it a very close equivalent of 154 CM and ATS-34 stainless steels, but since it has the additional advantages offered by the RSP process, it is noactually closest to CPM 154—Crucible’s particle metallurgy version of 154 CM—with the addition of several trace elements. "
Bird and Trout D2 g10 with clip $74
SOLD Spyderco PD1 with micarta bolster and light burl cork. SOLD
This steel apparently is extremely tough, and I have been easily able to get this scalpel sharp. It responds very well to stropping and is nearly spot on identical to Cruwear from Crucible. From Spyderco, "PD#1's unique alloy composition includes: 1.1% Carbon, 7.75% Chromium, 1.2% Silicon, 1.6% Molybdenum, 1.1% Tungsten, 0.25% Manganese, and 2.35% Vanadium. Note that its moderate Chromium content provides only limited corrosion resistance, so please maintain your knife properly. "
SOLD Bush Camp D2 $93 SOLD
SOLD Cub Bear D2 $64 SOLD
SOLD Benchmade D2 Bone Collector Boning $68 SOLD
SOLD Jaeger D2 Boning $68 SOLD
SOLD Alpha Wolf D2 $68 SOLD
Prices via PayPal include USPS priority and the PayPal fee. Kydex sheaths fit Spyderco Gclips (not included) and the leather sheaths are available except the BushCamp and Cub are a combo leather sheath.
Spyderco RWL-34 with blue cork. $120
This knife has mating wear on the edges of the cork where the sheath goes over it. The pins are steel, and the grip is fairly thin. This steel reportedly has good toughness and is easy to get sticky sharp. The sheath can accept a Gclip, but it is not included. From Spyderco, "RWL 34's alloy composition is as follows: Carbon - 1.05%, Manganese - 0.50%, Silicon - 0.50%, Chromium - 14.0%, Molybdenum - 4.00%, Vanadium - 0.20%. This advanced alloy mix makes it a very close equivalent of 154 CM and ATS-34 stainless steels, but since it has the additional advantages offered by the RSP process, it is noactually closest to CPM 154—Crucible’s particle metallurgy version of 154 CM—with the addition of several trace elements. "
Bird and Trout D2 g10 with clip $74
SOLD Spyderco PD1 with micarta bolster and light burl cork. SOLD
This steel apparently is extremely tough, and I have been easily able to get this scalpel sharp. It responds very well to stropping and is nearly spot on identical to Cruwear from Crucible. From Spyderco, "PD#1's unique alloy composition includes: 1.1% Carbon, 7.75% Chromium, 1.2% Silicon, 1.6% Molybdenum, 1.1% Tungsten, 0.25% Manganese, and 2.35% Vanadium. Note that its moderate Chromium content provides only limited corrosion resistance, so please maintain your knife properly. "
SOLD Bush Camp D2 $93 SOLD
SOLD Cub Bear D2 $64 SOLD
SOLD Benchmade D2 Bone Collector Boning $68 SOLD
SOLD Jaeger D2 Boning $68 SOLD
SOLD Alpha Wolf D2 $68 SOLD
Last edited:
