Lane Precision Rifles - build and review ***Updated 1/13/20***

OP
Josh Boyd

Josh Boyd

Super Moderator
Staff member
Joined
Oct 17, 2012
Messages
608
Location
Montana
Dallas has been waiting for some decent weather in order to work on some initial testing. But for those who are interested in seeing more of this rifle, here is another picture with the Maven RS.1 mounted up.

f4c42d12bf06c2b624a29ad0eaad3605.jpg



Sent from my iPhone using Tapatalk
 

DRUSS

WKR
Joined
Mar 6, 2016
Messages
460
Location
nw oregon
Looking good. Like to hear some more about that scope too? Does it feel the way you expected? (Balance and pointability, weight)?

Sent from my SM-G960U using Tapatalk
 

338maker

WKR
Joined
Mar 3, 2016
Messages
338
Looking good. Like to hear some more about that scope too? Does it feel the way you expected? (Balance and pointability, weight)?

Sent from my SM-G960U using Tapatalk


The way this scopes sits low and is pretty short makes for the feel of rifle over all very handy and fast
 
OP
Josh Boyd

Josh Boyd

Super Moderator
Staff member
Joined
Oct 17, 2012
Messages
608
Location
Montana
It looks like Dallas has been out to the range doing a little load development and accuracy testing. Here are a couple of test targets from 100 yards. These 3- shot groups shooting Hornady 220 ELD-X at 3050 are flat out amazing. I accused him of using a little sorcery to get these results but in reality this is normal for his rifle builds.

8264c07cef6d9b0fc3f8117848219765.jpg

53583020b884e135259b1d17b15d1593.jpg



Sent from my iPhone using Tapatalk
 
Last edited:

338maker

WKR
Joined
Mar 3, 2016
Messages
338
I know the "not in the center" comment will come up but when I look for accuracy in load work I could care less about where they land I want em tight then I adjust … plus Mister josh will need too zero it for where he likes it!!!! this rifle really likes the 220 ELD-X bullets should be a really good elk smasher combo!!!
 
Joined
Jan 23, 2017
Messages
66
Location
missouri
Dallas has been waiting for some decent weather in order to work on some initial testing. But for those who are interested in seeing more of this rifle, here is another picture with the Maven RS.1 mounted up.

f4c42d12bf06c2b624a29ad0eaad3605.jpg



Sent from my iPhone using Tapatalk

What cerakote color did you go with? Is the action just DLC only?
 

338maker

WKR
Joined
Mar 3, 2016
Messages
338
every single part on all my actions are DLC treated inside and out !! I then spray the entire action and all metal in a custom black mix that gets pretty dam close to matching the DLC to begin with … you can never get them to match and it absolutely drives me up a wall crazy if its slightly off
 

338maker

WKR
Joined
Mar 3, 2016
Messages
338
looking forward to you getting to the range and letting it rip …. I know I enjoyed it
 
Top