Let's See Your Semi-Custom Tikka Builds

[Fonkie]

Superlite 7mag, Mesa Altitude,LRI fluted bolt,tactical bolt handle & elay precision trigger spring set at 1-1/4lbs.

 

[Fonkie]

 

[AirborneEScouter]

Manners added their compact stock style cheek piece for me. Shooting Berger 215s (factory ammo) pretty well

 

[fatbacks]

What was your muzzle thread pitch? I have a t3x lite in 7mm rem mag, but the muzzle at 24" is too thin to have any shoulder left. , would need to chop down to 22" at least as well to thread anything

1/2 x 28 worked with both the 22" and 24" barrel.

 

[907to406]

Love these semi custom Tikkas!
Build thread for anyone interested.

Tikka Super Light 300WM build

Since there are so many Tikka fans on here and always folks asking about Tikka builds I figured it was time to share my most recent Tikka project. I've been missing a heavy hitting .30 Caliber in my hunting rifle arsenal since I sold my 300RUM and 308 a few years back. My primary go to hunting...

www.rokslide.com

 

[sportsmans challenge]

22 creedmore in an ag stock
Will be raffled in a few weeks.

 

[Bojangles21]

22 creedmore in an ag stock
Will be raffled in a few weeks.

How can we enter?? I have been wanting a 22 creedmoor


Sent from my iPhone using Tapatalk

 

[sportsmans challenge]

This creedmoor they have made an auction item, the raffle is consisting of a couple rifles some targets and another item see below.
There is an event oct 3rd here in coer d alene idaho for the scilent auctions and live auctions. Should be a few more rifles and many many other items available there.

Casey Jean Strong

Casey Jean Strong, Coeur d'Alene, Idaho. 513 likes. Benefit organization to help Casey Jean and her family with the costs of care and her need of a kidney transplant. DONATIONS ARE NEEDED AND WELCOME.

www.facebook.com

For tickets you can get a hold of the page and they can help with tickets.

 

[sportsmans challenge]

907 to 406 these two tikkas look very similar

 

[khuber84]

Here's a new stock I'm having bedded to a long action tikka 257 saum. It's from jcs composites. Weighs in at 30oz. They have a nice sporter style stock as well that's in the 26oz range. Turn around time was 3.5 weeks, 700$ with rail and cups, not cheap but the build quality looks very good. They offer several color schemes as well. Just another option in the growing aftermarket Tikka support.

 

[Devildogg]

Anyone have any experience with their 8 twist 22-250 and some 75 gr projectiles?

 

[Devildogg]

Yes I have been shooting 75 ELDM out of my 1:8 twist tikka 22-250 for almost 2 years now.

Loaded to 3380 fps speed has been very accurate even to steel at 1k. It worked great on 3 deer this fall with ranges from 320 to 420 yards.

Is there enough meat at the muzzle to thread 1/2x28? For suppressor

 

[duchntr]

I did on mine. Bushing up to 5/8x24 so I can use my 30 cal suppressors.

Do you have a recommendation on a shop to do a cut and thread in the anchorage/matsu area?

 

[sportsmans challenge]

Got this one in, 6.5 saum from hells canyon armory.

Just got our tikka hybrids opened up to 35mm for the leupolds as well as the other 35's.

 

[khuber84]

Got this one in, 6.5 saum from hells canyon armory.

Just got our tikka hybrids opened up to 35mm for the leupolds as well as the other 35's.

How'd you get Hawkins 35mm single piece rings?! I want some........only reason I haven't gone mk5hd.

 

[sportsmans challenge]

How'd you get Hawkins 35mm single piece rings?! I want some........only reason I haven't gone mk5hd.

We will have them soon on the www.bertrambrass.com website, we are having our 34mm converted/opened up my a machinist that made a fixture and all. We were testing to make sure the rings worked with the scope 1st before we had a bunch done. Once i have a few sets ready i will post on the site. Extra machining done will cost a bit more.

 

[KClark]

When will you be shipping 30mm Tikka Hybrids?

We will have them soon on the www.bertrambrass.com website, we are having our 34mm converted/opened up my a machinist that made a fixture and all. We were testing to make sure the rings worked with the scope 1st before we had a bunch done. Once i have a few sets ready i will post on the site. Extra machining done will cost a bit more.

 

[sportsmans challenge]

As soon as orders are made. We have 30's on hand low and high

 

[KClark]

On hand? But when will you ship them? Ordered 30mm low a month ago.

As soon as orders are made. We have 30's on hand low and high

 

[Muttly]

Do you have a recommendation on a shop to do a cut and thread in the anchorage/matsu area?

Steve at Alaska Custom threaded mine for an Area 419.