WTS Lite Outdoors 18" Titanium Stove - needs legs

[silverbullet555]

SOLD

For sale is a Lite outdoors Large (18") cylinder stove.

It is used, but not by me.

You'll get the body, 4 body rings, 48" stove pipe with 5 rings, 2 storage rings for the body, end plates, rods.

You will need to fashion legs which I would use long bolts for so they have a head for a larger footprint as the rod ends could sink into soft ground.

The stove, where the pipe goes in, has some of the normal wrinkles that are associated with these kinds of stove.

One of the threaded inserts for the feet is loose. It could be lived with or one could fix it with high temp epoxy or perhaps by crimping it.

$180 paypal shipped to the lower 48.

 

[Wrench]

To set that riv nut, insert a bolt with a couple washers between the riv nut and a nut threaded up the bolt. Tighten the nut alike a jam nut to swell the riv nut.....they set just like a regular rivet.

I forget the pitch, but they are metric.

Good luck.

 

[lotsofshots]

PM sent


Sent from my iPhone using Tapatalk

 

[silverbullet555]

BTT