Formidilosus
Super Moderator
- Joined
- Oct 22, 2014
- Messages
- 8,279
This is a field evaluation of the Maven RS1.2 2.5-15x44mm SHR-Mil reticle scope. This scope was given to me by Ryan. The baseline 30 round group with this lot of ammunition was 1.5” at 100 yards.
The scope and weight-
Turrets:
Elevation turret is exposed, revolution indicated, 10 mils per rev, zero stopped, and tool less reset. Zero stop requires a tool. Windage is capped, revolution indicated, and tool less reset.
Elevation-
The top of the turrets unscrew from the rest to allow reset. The windage turret is identical-
Zero stop is simple pin on pin.
SHR-Mil reticle:
2.5x-
15x-
Illuminated-:
3x max illum-
15x, setting 4 of 10-
The reticle is good from a visibility perspective. The heavy stadia are 5 mils from center, with .5 mils spacing between increments. It has a center dot with on open center, and the first hash mark at .5 mils is where where the vertical and horizontal stadia lines begin.
Con’t….
The scope and weight-
Turrets:
Elevation turret is exposed, revolution indicated, 10 mils per rev, zero stopped, and tool less reset. Zero stop requires a tool. Windage is capped, revolution indicated, and tool less reset.
Elevation-
The top of the turrets unscrew from the rest to allow reset. The windage turret is identical-
Zero stop is simple pin on pin.
SHR-Mil reticle:
2.5x-
15x-
Illuminated-:
3x max illum-
15x, setting 4 of 10-
The reticle is good from a visibility perspective. The heavy stadia are 5 mils from center, with .5 mils spacing between increments. It has a center dot with on open center, and the first hash mark at .5 mils is where where the vertical and horizontal stadia lines begin.
Con’t….