My 2013 Big Game Set Up

evan williams

Senior Member
Joined
Jan 28, 2012
Messages
1,628
Location
Colorado Springs
I have had a few requests to see my hunting rig and since I am fighting off a cold lying in bed....I have some time to get them up!

ImageUploadedByTapatalk1360594875.978882.jpg

ImageUploadedByTapatalk1360594909.390665.jpg

ImageUploadedByTapatalk1360594935.967224.jpg

ImageUploadedByTapatalk1360594983.455073.jpg

I am running the 2013 matrix G3
28.5"/72#
CBE Tek-Hunter 3 pin all green
Hamskea non-containment to btm limb
Tight Spot Quiver
ABB custom str/cbl 8190/452X
Specialty Super Peep
HUD Bow mount
B Stinger quick disconnect
B Stinger adj side bar mount
15" B Stinger "side rod" in front (4)
10" B Stinger Sport Hunter back (5)
Easton Carbon Injexion 400s
- currently w/ 2.1 fusions from last yrs fletching job have 2" AAE MAX HUNTERS as well


I have been hunting for yrs with a Carter Quickie and will be playing with a Scott Hexx an a Longhorn Hunter as well as still playing with weights and balance position.
 

Travis Bertrand

Super Moderator
Staff member
Joined
Mar 9, 2012
Messages
3,408
Location
Reno,NV
That's pretty Evan, what kind of speed/ke are you getting from it or have you ran it through a chrono yet?
 

shaun

Senior Member
Joined
Apr 29, 2012
Messages
1,492
Location
Central CA
I was throwing around the idea of a side bar and using same stabilizer. I have a ton of front weight right now I have the hogg father extended almost all the way out and I also have the bee stinger pro hunter with the 14oz weight out front. I dont like how much weight is out there
 

Travis Bertrand

Super Moderator
Staff member
Joined
Mar 9, 2012
Messages
3,408
Location
Reno,NV
I was throwing around the idea of a side bar and using same stabilizer. I have a ton of front weight right now I have the hogg father extended almost all the way out and I also have the bee stinger pro hunter with the 14oz weight out front. I dont like how much weight is out there

I'm cutting some of my dovetail off so I can scoot my sight in a little. Like you, ton of weight forward.
 

sk1

Senior Member
Joined
Mar 28, 2012
Messages
1,203
Location
SE Wisconsin
I was throwing around the idea of a side bar and using same stabilizer. I have a ton of front weight right now I have the hogg father extended almost all the way out and I also have the bee stinger pro hunter with the 14oz weight out front. I dont like how much weight is out there

Yikes man that's alot of weight....I was starting to think mine was getting too heavy with a 10 inch b stinger pro 8oz weight and mbg ascent with 6 inch dovetail.

I wanted to play with some weight back and out to the side to better balance the bow and went with the doinker AOSM mount, just haven't had a chance to play with it yet and see if I like it or not


I like the setup Evan looks nice, can't wait to finish getting my
Bow together
 
Joined
Feb 25, 2012
Messages
75
Location
Nevada
Great setup, Evan.

I guess we think alike...I am running basically the same setup this year on my Motive 7 as far as front and side stabilizers go.

Brady
 

Manosteel

Senior Member
Joined
Jan 24, 2013
Messages
1,391
Location
Alberta, Canada
What's your total weight of the bow with everything on? I have been toying with idea of adding an offset rear stabilizer similar to what you have ( but just one side) but lugging a heavy bow in the backcountry is not appealing to me. How do you find it?
 
OP
evan williams

evan williams

Senior Member
Joined
Jan 28, 2012
Messages
1,628
Location
Colorado Springs
Evan -are the pins more stout on the 2013 CBE sights?

Matt

I believe them to be yes! I still hands down think that Spot Hogg makes the best pin set-up on the market but the RHINO from CBE is much more solid in construction than the previous pins. Which, yes, I am still shooting.
 
OP
evan williams

evan williams

Senior Member
Joined
Jan 28, 2012
Messages
1,628
Location
Colorado Springs
Thanks Justin!!

The Hoyt's AP Snow finish is more of a Matte Finish unlike the Elites I have seen which seem a little glossy for me and I have seen and heard from guys hunting that they appear to shine a little so I was really happy to see the matte! It's been a GREAT shooter.

My plan is to short post my draw stop, retime cams (reducing my let-off), and get a little more aggressive back wall like my Spiral X cams on my Pro Comp Elite XL target rig just to get more consistency between my bows.
 

armyjoe

Super Moderator
Joined
Jun 26, 2012
Messages
1,043
Location
Denver, CO
Just got our chrono working so I will shot a few through before the weekend and get some numbers posted!

Bout time you got that thing working haha. I'm headed down there today or tomorrow and was gonnna bring a extra 9 volt battery for ya :D

Oh and his "pretty bow" is pretty badass. I drool over it when I'm down at his shop. Definitely a great setup man.
 
Top