Retumbo 300 WM, 180 AB

Joined
Nov 25, 2016
Messages
3,721
Location
Utah
300WM, Nosler brass, Nosler 180 AB, 215 pr, 79 gr H1000.

Then I ran out of H1000. And it seems impossible to find.
I have enough bullets loaded for my elk hunt this year, but I need to look at another powder. I have 4-6 lbs of Retumbo, but can't seem to find any data on the powder load for 180 gr AB in a 300 WM. I have read a small bit on some guys going this route but not with the powder data.

Have any of you crushed a 180 gr bullet into this case with retumbo, and if so where did you start with charge weight?
I am currently at 79 gr of H1000, and I am tight into the bullet. Not too tight that my bullet creeps out after a few days.
I have read if retumbo is tight it burns very well in this light bullet in 300 WM.
Some have said to start at the high side where H1000 ends, but I am not comfortable doing that.
I also have some N565 coming. I also have some H4350 if i had to use it. Just wish I could stay with H1000 and not have to redo the work up on a new powder, that may be gone one day like the other popular ones.
 
OP
mfllood3800
Joined
Nov 25, 2016
Messages
3,721
Location
Utah
orelkaddict thx, I have ordered some different powders. Hoping these will set well with this rifle.
 

elkguide

WKR
Joined
Jan 26, 2016
Messages
4,650
Location
Vermont
With my .300 WM and 175 grain Bergers I have gotten incredible speeds and accuracy out of the old stand by IMR 4350.
 

tdot

WKR
Joined
Aug 18, 2014
Messages
1,888
Location
BC
I had great success with 180 grain AB and Retumbo. It was the most accurate load in my 300wm. I've sold the rifle, but will see if I can find my notes and will post the details if I do.
 

mmac

WKR
Joined
Mar 30, 2017
Messages
358
Location
AZ
I have had good luck with H4831sc and Rl22 on the 180s and the 200's. I am getting 2980fps with the 200's using the nosler manual load with RL22 and 26inch barrel.
 

Chad E

WKR
Joined
Jan 22, 2013
Messages
622
Location
Eastern Washington
Retumbo is a pretty hot commodity these days. I would imagine you would have no problem trading it for H1000 if you wanted to stick with your proven load.
 
OP
mfllood3800
Joined
Nov 25, 2016
Messages
3,721
Location
Utah
I had great success with 180 grain AB and Retumbo. It was the most accurate load in my 300wm. I've sold the rifle, but will see if I can find my notes and will post the details if I do.
I would definitely be interested in seeing this. Thx
 
Top