WTS Ti muzzle brakes, various sizes and styles available

[Salmon River Solutions]

I have 3 styles that I did small production runs on.

5/8-24, 9/16-24, 1/2-28 slab style 3 Port. The 5/8-24 version Weighs 1.8 oz and is 1.875” OAL. Diameter for blending and timing is .88”. Thread depth is .6”. These all have my triangular top ports. These can be bored for calibers up to .375. These are $150/each.

Next I have my 5 port self timers. All 5/8-24, they weigh right at 2 oz, and are only 2.3” OAL with a thread depth of .7”. They are .99” OD, and can be bored for calibers up to .338. These are $180/each.

Last ones I have available are mySporter 4 port brakes these are all 1/2-28 with a thread depth of .625” These are designed around sporter and featherweight barrels. The OD is .73” and can be turned down to .6”. They are .9oz and 1.725” OAL and can be used on calibers from .223 up to .308. These are $100/each.

All my brakes are made out of grade 5 6al4v titanium and are bored to order and come in a garnet blasted finish.

I have various other brakes in the design or prototype stages, so if you don’t see what your looking for shoot me a pm.

 

[david2duck]

Quality brakes. I bought the self timing 5 port a few weeks ago and liked it so much I bought two more. Lightweight, great machining, and good prices. On par with the best brakes out there if not better.

I also bought one of the picatinny + arca Swiss rails and a picatinny + outdoorsman rail. They are slightly bigger then my regular rails but weigh less. They work perfectly.

Buy with confidence.

 

[Salmon River Solutions]

Also have my “Ti Pro” 5 port titanium muzzle brakes available now.

The design intent with this brake was to make something intended to be turned down to match the proof carbon sendero contour barrels. They are .99” OAL and can be turned down to .9” diameter. They also look great on the OMR barrels that are 1” diameter. The photo of the brake on a gun below is the OMR 1” barrel slightly tapered to match the .99” diameter. Rest of the specs below

5/8-24,
2.1” OAL
2.0 oz
Can be bored for cartridges up to .338.

 

[Swift]

Ken is making some nice pieces And a great guy to deal with

 

[Salmon River Solutions]

Still have a few of all the styles listed above available.

 

[Salmon River Solutions]

Still have everything available! Only a few of the self timers left though.

 

[Salmon River Solutions]

Just finished a run of the self timing brakes in 5/8-24. I changed the design slightly to get slightly more recoil reduction, and at the same time reduced weight a bit!

 

[Swift]

Bump for a great guy and brake I'm super impressed with the one I put on my 300 rum!!