titanium elbow stove pipe?

[reaper]

Any of you have idea or if something already made for a elbow stove pipe?I dont what that solid steel elbow,looking for titanium ULTRALIGHT 3" idea??

Envoyé de mon RCT6K03W13 en utilisant Tapatalk

 

[ChrisF]

Bonjour Reaper - I've never seen a titanium stove pipe elbow. Even my Four Dog stove came with an elbow made from galvanized steel.

 

[247247]

Titanium is hard to work with and expensive, but a good tig welder could build you one. I'd probably charge about $300 for one though.

Edit---- check these out, maybe one will work --- https://www.ticonindustries.com/collections/mandrel-bends

 

[reaper]

Titanium is hard to work with and expensive, but a good tig welder could build you one. I'd probably charge about $300 for one though.

Edit---- check these out, maybe one will work --- https://www.ticonindustries.com/collections/mandrel-bends

Not gonna pay 300 for an elbow Its for a stove in a tent, thanks,i found something else.

Envoyé de mon Pixel 2 en utilisant Tapatalk

 

[BadgerStateBugler]

You could make one pretty easily. I work for a union HVAC shop and in our apprenticeship we make small diameter ftgs. To simplify this project and take the math out, I'd buy standard 3" adjustable 90* elbow from local hardware or home center (Menards, Home Depot,etc.) Disassemble the ftg, flatten the 4pcs out completely, trace on to the titanium, cut out... Bent the grooves and roll to shape, drill and rivet the PC's together. Assemble!!!!