Sold Victory Rip TKO

Status
Not open for further replies.

alabamahunt

Lil-Rokslider
Rating - 100%
1   0   0
Joined
Oct 20, 2020
Messages
110
12- RIP TKO Elite 300’s
Max Stealth Vanes (hard helical) and 50gr inserts.
The three that are fletched and the only ones that I have shot. The halfserts do have a slight wobble. Arrows are cut 27 1/4 carbon to carbon and are 28 1/4 to the end of the halfsert. I am needing a 250 spine I believe.

Will fletch the rest if you would like for $190 shipped
 

Attachments

  • A2091825-E4CE-46F9-A2C5-23A9AA45FB55.jpeg
    A2091825-E4CE-46F9-A2C5-23A9AA45FB55.jpeg
    577.1 KB · Views: 67
  • 3FEE7297-89F0-4CEF-9BBE-506DCB4536F5.jpeg
    3FEE7297-89F0-4CEF-9BBE-506DCB4536F5.jpeg
    226.5 KB · Views: 66

bigburr

FNG
Rating - 100%
3   0   0
Joined
Dec 26, 2019
Messages
69
Location
NE Wyoming
Take out the nock, put some drill bits in the shaft, and knock out the inserts. Have yet to find one that wouldn't come out. No matter the glue. A little heat on the insert helps speed things up.
 
Rating - 100%
11   0   0
Joined
Jan 28, 2018
Messages
404
Take out the nock, put some drill bits in the shaft, and knock out the inserts. Have yet to find one that wouldn't come out. No matter the glue. A little heat on the insert helps speed things up.
^^^this has worked for me on epoxy glued inserts. It takes some time to get them moving but they'll come out eventually.

Sent from my SM-J737T using Tapatalk
 
Status
Not open for further replies.

Latest posts

Featured Video

Stats

Threads
319,616
Messages
3,352,406
Members
74,474
Latest member
MrAP
Top