Zeiss Conquest V4 on Kimber 8400 Mounting Trouble

One-shot

Lil-Rokslider
Joined
Dec 4, 2018
Messages
160
Location
Spring Creek, Nevada
Hey All,
If anyone can shed some light on this I’d much appreciate it. Just got a new Kimber Mountain Ascent 7mm Rem Mag and trying to mount a new Zeiss Conquest V4 on it. Using correct medium height Talley scope rings and can’t get scope to align with where the bullet should hit. Just setting up in the house for now before going out to sight in fully. Currently, scope is showing 2 1/2” high at maximum turret stem adjustment. Any thoughts? Really want to ge this set up sighted.
Thanks,
 
OP
One-shot

One-shot

Lil-Rokslider
Joined
Dec 4, 2018
Messages
160
Location
Spring Creek, Nevada
We maxed the turret stem up and the barrel is still not up to the scope cross hairs. We put a straight edge across the mounting holes for the rings and the back holes are 1/8” lower than front.
 
Joined
Oct 5, 2019
Messages
510
If your rings are different heights that should’ve been extremely evident when mounting.
If that’s the case you better hope you didn’t torque the tube.
 
Top