MuleyFever
WKR
What is your method for cleaning the breach plug? It seems like I never get it really clean.
What is your load info and drop in inches from 100 to 200?
What is your load info and drop in inches from 100 to 200?
What is your method for cleaning the breach plug? It seems like I never get it really clean.
What is your load info and drop in inches from 100 to 200?
What is your method for cleaning the breach plug? It seems like I never get it really clean.
What is your load info and drop in inches from 100 to 200?
I use a drill bit to clean out the flash channel, had turn the bit. To clean the small flash hole I use a welding tip cleaner. Some M-Pro 7 on a pipe cleaner removes the left over black crud in the flash channel.
It would be my suggestion to not to put anything in the flash hole - it erodes quick enough as it is.... I would also suggest no metal probing of any kind. When I do insert something I use a point tooth pick. And normally the flash hole is a non-factory - blowing compressed air through will often work very well.
Interesting on the bullet drop. I was out shooting and had one shot left. I am zeroed at 100yds shooting a 300gr sabot with 100gr by volume of BH209. I decided to take my last shot at 200yds and I was about 5" low. That appeared to me to be not much drop from 100 to 200yds.