6.5 prc + staball hd

[Hagas4all]

Snagged a tikka 6.5 prc on holidays. Only powder I can reliably find is staball hd.

Anyone have loads and expected velocity with 143 eldx?

 

[Axlrod]

Don't know about HD, but H1000 is a top choice in the 6.5 PRC, and it is available at Powder Valley.

 

[Unckebob]

Hodgdon's website has some loads. In the same boat as you, I bought the same powder and will load some up tomorrow.

 

[Hagas4all]

Hodgdon's website has some loads. In the same boat as you, I bought the same powder and will load some up tomorrow.

Thanks Bob! Yea I checked the load data there. What I’m really trying to gauge is if the velocity is actually there before I jump down the rabbit hole.

I ran into a few guys at the range that were shooting tikka ctr with factory 147 match and only getting just north of 2800fps. That’s really not much more than a creed so was disappointed.

 

[Unckebob]

I got 2950 with H4831sc with my Tikka Roughtech.

 

[Hagas4all]

I got 2950 with H4831sc with my Tikka Roughtech.

That’s encouraging thanks!

 

[Tiny]

I'm getting 2990 with a 143 bondstrike and staball hd. I'll have to go look at my grains if you want that.

 

[DW1996]

Following along here. Really enjoying the new Winchester ball powders and how accurately they measure out of a powder dropper.

 

[northernalpine]

@Hagas4all
Ran a pressure test on my Roughtech this last weekend starting at 57gr and working up to 60gr with StaBALL HD with Hornady 1x brass and 215Ms. Didn’t get crazy velocity but it didn’t hit pressure either, I think either Hornady or Hogdon lists 60.1gr as book max for 143gr bullets. Pretty sure the barrel is just a fat kid and doesn’t run as fast as some others on here

I’d be curious what kind of powder charges everyone is running that is getting above 2900fps.

Chrono screenshot, shot 1 is 57gr and increases .5gr per shot to 60gr at shot 7.

 

[northernalpine]

I'm getting 2990 with a 143 bondstrike and staball hd. I'll have to go look at my grains if you want that.

Please share if you can

 

[Tiny]

Please share if you can

I'm shooting 60.5 grains of HD with fed. 215M primers, Lapua brass, 143 norma bondstrike. This is in a browning with a 26" barrel.

 

[Hagas4all]

@Hagas4all
Ran a pressure test on my Roughtech this last weekend starting at 57gr and working up to 60gr with StaBALL HD with Hornady 1x brass and 215Ms. Didn’t get crazy velocity but it didn’t hit pressure either, I think either Hornady or Hogdon lists 60.1gr as book max for 143gr bullets. Pretty sure the barrel is just a fat kid and doesn’t run as fast as some others on here

I’d be curious what kind of powder charges everyone is running that is getting above 2900fps.

Chrono screenshot, shot 1 is 57gr and increases .5gr per shot to 60gr at shot 7.
View attachment 682806

That’s crazy low how long is your barrel? Assuming 24.5?

 

[northernalpine]

That’s crazy low how long is your barrel? Assuming 24.5?

24.3” according to Finnish measurements. It doesn’t help that I’m at ~500’ MSL. Sure would be nice if RL26 would hit the shelves…lol

 

[Outdoorsman12b]

Got out today with new tikka prc and under max charge of staball hd 60.1 an abysmal 2860. Got up to 2930 ish over book max.

Wondering now how much more I can just squeeze out of the creed…

 

[Tiny]

Got out today with new tikka prc and under max charge of staball hd 60.1 an abysmal 2860. Got up to 2930 ish over book max.

Wondering now how much more I can just squeeze out of the creed…

what primer are you using?

 

[Outdoorsman12b]

what primer are you using?

BR2

 

[Tiny]

BR2

Maybe try a magnum primer I've seen 120fps gain in my creedmoor by shooting magnum over large rifle. Don't do this at max charge. Start in the middle and see what you gain then work up from there

 

[Outdoorsman12b]

Maybe try a magnum primer I've seen 120fps gain in my creedmoor by shooting magnum over large rifle. Don't do this at max charge. Start in the middle and see what you gain then work up from there

They are even harder to find than large rifle up here. One of the reasons I went with the 6.5 PRC was load data called for non magnum primers.

 

[hawgchaser]

I'm getting 2990 with a 143 bondstrike and staball hd. I'll have to go look at my grains if you want that.

Where did you find bondstrike's? They're more rare than hens teeth.