Euro Mount Hardware for Whale Tails

[6.5x284]

Looking for Euro Mount hardware that works well with whale tails. Do any come off the wall and tilt down forward at all? Have seen some tilt back a bit. The couple I've tried the antler tips rest on the wall so the skull doesn't fully seat on the mount. Came into the man cave to see her sideways on the wall yesterday.

 

[hobbes]

Can't help you with the hanger, but Wow!!!...those are some back scratchers.

 

[hobbes]

I've not used one but it looks like this one holds it out from the wall but not sure if it'll work for yours.

Skull Bracket

American made brackets to hang mule deer, elk, antelope, buffalo, moose, whitetail, bear, and other skulls.

www.amazon.com

 

[Dos Perros]

The Skull Hooker puts it off the wall as far as anything I've seen, but you might still have trouble! You can get on Amazon, free returns.

Wonder what @NDGuy used for his?

 

[BRTreedogs]

@6.5x284 Humble Brag much

 

[NDGuy]

Wonder what @NDGuy used for his?

Lol about that…

 

[Ucsdryder]

@6.5x284 Humble Brag much

I literally was typing the EXACT same thing when I saw this.

Anybody make an extra extra large catchers cup? The normal ones just don’t fit…

 

[TreeWalking]

I shoulder-mounted with a severe turn to the left so the 6's did not hit the drywall. You walk in that home, that elk was staring you down.

 

[6.5x284]

I literally was typing the EXACT same thing when I saw this.

Anybody make an extra extra large catchers cup? The normal ones just don’t fit…

I actually didn't post pictures at first but I hate threads without pictures!

 

[Ucsdryder]

I actually didn't post pictures at first but I hate threads without pictures!

Don’t take my post the wrong way. It was 100% written with the greenest envy that you’ll ever see!

 

[NDGuy]

I actually didn't post pictures at first but I hate threads without pictures!

Just enjoy it and smile at your problem. Although you saved yourself $3500 unlike me

 

[6.5x284]

The Skull Hooker puts it off the wall as far as anything I've seen, but you might still have trouble! You can get on Amazon, free returns.

Wonder what @NDGuy used for his?

Thanks, I've seen that one in adds. I'll give it a try, good point about free returns. I suppose most would do a shoulder mount and that would keep it off the wall, but I prefer the clean white skull look! Plus, I'm cheap lol.

 

[NDGuy]

Thanks, I've seen that one in adds. I'll give it a try, good point about free returns. I suppose most would do a shoulder mount and that would keep it off the wall, but I prefer the clean white skull look! Plus, I'm cheap lol.

I would try to order something otherwise jerry rig something, could do a metal rod with a hook that comes off the wall enough. Just jb weld together or something

 

[BRTreedogs]

@6.5x284 wonderful bull brother.

 

[FLATHEAD]

I order 8" double swivel brackets from Mckenzie Taxidermy.
I then use 1/2 flat stock attached to the bracket to set it out
farther from the wall.
This was for an Aoudad, may not work for Elk, but you can turn
the head with those swivel brackets.

I tried the skull hooker. Maybe for hanging a hat.

 

[Dos Perros]

Thanks, I've seen that one in adds. I'll give it a try, good point about free returns. I suppose most would do a shoulder mount and that would keep it off the wall, but I prefer the clean white skull look! Plus, I'm cheap lol.

Also nice thing about the Skull Hooker is you can pivot the angle down to get those tips off the wall.

I too am cheap.

 

[BRTreedogs]

These guys have an extended option.

All Products

PREMIER PRODUCTS FOR THE MODERN HUNTER

ikonbuilt.com

 

[BRTreedogs]

I made a hanger by welding a 3/4" pipe onto a plate.
It had to be way flatter and longer then I had thought.

I've seen on another there here where guys were using wire/braided cable thought the back of the skull some how then it hangs with the skull straight up and down on the wall.

 

[Jimss]

I've used skull hooker for a bunch of different species and they work very well. They are pretty nice because you can change the clearance angle and also turn the entire skull/antlers to get the desired look. Here's a few pics from their website.

 

[Hunting_Oregon]

What did you end up using? Would love to see how it turned out